Worktop joint repair in Exeter
Professional worktop joint repair services in Exeter and surrounding areas. Local, reliable handyman - no job too small.
Price Guide
£60-£85
Typical Duration
45-90 mins
Location
Exeter, Devon
Professional worktop joint repair - failed seams cleaned out, properly resealed, watertight finish restored. Stop water damage before it ruins your worktop.
Stop Water Damage In Its Tracks
Worktop joints are vulnerable. Water finds its way in, chipboard swells, and before you know it you need a new worktop. Resealing a joint is quick and cheap. Replacing a worktop isn't.
💡 Pro tip: Check your worktop joints regularly. Run your finger along them - if you feel a gap or soft sealant, it's time to reseal.
Why Professional Repair Matters
| ✅ Done Right | ❌ Done Wrong |
|---|---|
| Watertight seal | Still leaking |
| Proper compound | Wrong sealant |
| Joint pulled tight | Gap remains |
| Long-lasting fix | Fails again |
What You Get
🔧 The Full Service
| Stage | What Happens |
|---|---|
| Assess | Joint condition checked |
| Clean | Old sealant removed |
| Tighten | Joint bolts adjusted |
| Seal | Proper compound applied |
| Finish | Excess cleaned off |
📦 You're Left With
- Watertight joint
- Neat appearance
- Matched colour
- Peace of mind
Pricing Guide
| Scope | Estimated Time | You'll Pay |
|---|---|---|
| Simple reseal | 45 mins | £60 |
| Complex joint repair | 90 mins | £85 |
Based on £60 minimum (first hour) + £50/hr after.
Perfect For Your Project If...
✅ Leaking joint - Stop water getting in
✅ Visible gap - Seal before damage
✅ Discoloured sealant - Fresh finish
✅ Kitchen refresh - Sort the details
Why Choose Us for Worktop joint repair in Exeter?
Watertight seal restored
Prevents water damage
Neat appearance
Proper sealant used
What to Expect
Step 1: Assess
Joint condition checked, water damage evaluated.
Step 2: Repair
Old sealant removed, joint tightened if needed, resealed.
Step 3: Finish
Excess cleaned, smooth finish achieved.
🔧 DIY Tips
Resealing yourself? Here's what's involved:
🔧 Materials you'll need
- Worktop joint compound (not silicone)
- Sharp scraper
- Clean cloths
- Allen key (for joint bolts)
- Masking tape (optional)
📐 The proper approach
- Remove all old sealant completely
- Check for water damage underneath
- Clean joint surfaces thoroughly
- Check/tighten worktop bolts if accessible
- Apply joint compound to both surfaces
- Push joint closed firmly
- Wipe excess immediately
- Leave undisturbed to cure
⚠️ Common DIY mistakes
- Not removing old sealant properly
- Using silicone (wrong product)
- Not tightening the joint
- Disturbing before cured
💡 Pro trick: Worktop bolts are underneath, pulling the joint together. If you can access them (check under the worktop), tightening these closes the gap before sealing.
Rather leave it to a pro? No problem - that's what I'm here for. Give me a call.
Good to Know
🔩 Check the bolts - worktop joints have metal bolts underneath that pull the sections together. If these have loosened, the joint opens up. Tighten before resealing.
Joint problems signs:
- Visible gap at surface
- Discoloured sealant
- Water sitting in joint
- Lifting laminate nearby
Prevention:
- Wipe spills immediately
- Don't leave wet cloths on joints
- Check seals annually
- Address problems early
Frequently Asked Questions
Why do worktop joints fail?
Usually water getting in over time, poor original sealing, or movement in the units. Once water reaches the chipboard core, it swells and pushes the joint apart.
Can a failed joint be repaired or does the worktop need replacing?
If caught early, joints can be resealed. If water damage has caused swelling or delamination, that section may need replacing. We'll assess and advise.
What sealant do you use?
Waterproof joint compound designed for worktops. Standard silicone isn't suitable - it doesn't bond well and discolours. Proper worktop sealant is colour-matched and permanent.
How do I prevent joint problems?
Wipe up spills, especially at joints. Don't leave standing water. If you notice the seal failing, fix it before water gets in. Prevention is much easier than repair.
Worktop joint repair Also Available In:
Get a Free Quote in Exeter
Call us today for a free, no-obligation quote for your worktop joint repair job in Exeter.
01392 964094Request Online QuoteOur Rates
Got multiple jobs?
Make the most of your first hour - I can often tackle several small tasks in one visit. List everything you need done when you call!
Why Trust Us
Need Worktop joint repair in Exeter?
Get a free quote for your worktop joint repair job in Exeter today.