Rotary Washing Line Installation in Exeter
Professional rotary washing line installation services in Exeter and surrounding areas. Local, reliable handyman - no job too small.
Price Guide
£85-£135
Typical Duration
1.5-2.5 hrs
Location
Exeter, Devon
We install rotary washing lines properly - dug deep, concreted solid, positioned for the best drying. No more wobbly posts or lines that lean when you hang out the sheets.
Getting It Solid
A washing line seems simple until yours is leaning at 45 degrees with a full load on it. We've seen them all - shallow holes, weak concrete, positioned in the shadiest corner of the garden because someone didn't think it through.
We dig to the right depth (60cm minimum), use proper concrete mix, ensure it's perfectly level, and position it where it'll actually get sun and airflow. Your washing line should last years without moving.
Position Matters
Where you put a washing line makes a massive difference to how well your washing dries. We'll advise on the best spot considering sun position, prevailing wind, access from your back door, and whether it'll annoy you when you're trying to mow the lawn.
💡 Pro tip: Position it so the prevailing wind blows across the lines, not along them. Much better airflow, faster drying.
| Done Right ✅ | Done Wrong ❌ |
|---|---|
| 60cm+ depth, proper concrete | Shallow hole, quick-set cement |
| Perfectly level with spirit level | "Looks about right" |
| Good sun and wind position | First empty spot found |
| Socket aligned straight | Rotated randomly |
| Area left clean and tidy | Concrete splashes everywhere |
Why Choose Us for Rotary Washing Line Installation in Exeter?
Properly concreted and leveled
Positioned for best drying
Solid enough for heavy washing
All mess cleared away
What to Expect
1. Site Assessment We check where you want it, confirm it's a good position (or suggest better), and make sure there's no pipes or cables below. Quick measure and quote.
2. Installation We dig the hole, set the socket dead level, concrete it in place, and make sure it's aligned properly. Takes 1.5-2.5 hours depending on ground conditions. Soil and excess concrete removed.
3. Ready to Use Socket concreted and curing. We'll let you know when it's ready to use (24-48 hours). If you've supplied the line, we can fit that too once concrete is set.
🔧 DIY Tips
Tools You'll Need
- 🔧 Post hole digger or spade
- 🔧 Spirit level
- 🔧 Bucket for mixing concrete
- 🔧 Tape measure
- 🔧 Wheelbarrow
Steps
- 📐 Mark position (consider sun, wind, access)
- 📐 Dig hole 60cm deep, 30cm diameter
- 📐 Mix concrete (3 parts ballast to 1 part cement)
- 📐 Set socket in concrete, level it perfectly
- 📐 Check level in all directions as concrete sets
- 📐 Leave 24-48 hours before using
Common Mistakes
- ⚠️ Not digging deep enough - it'll lean within a month
- ⚠️ Using quick-set cement - not strong enough for the job
- ⚠️ Not checking level - you'll never get it adjusted once concrete sets
- ⚠️ Positioning in full shade - washing takes twice as long to dry
Pro Trick
💡 Before the concrete sets, scratch a north-pointing arrow on top of the socket. Makes it way easier to position the washing line in the same direction every time for best drying.
Rather leave it to a pro? No problem - that's what I'm here for. Give me a call.
Good to Know
Combine with:
- Patio cleaning before positioning
- Garden clearance to create better access
- Lawn repairs after installation
Related services:
- Fence repairs (good fences make good neighbors when hanging washing)
- Paving for area underneath (no muddy feet)
- Shed assembly (for storing pegs and line)
Seasonal tips: Can be installed year-round, but concrete cures slower in winter. Summer installations cure quicker. Avoid frosty days - frost damages fresh concrete.
Frequently Asked Questions
How deep do you concrete the socket?
We dig down 60cm minimum and use a proper concrete mix. It needs to be solid - nothing worse than a washing line that leans when you load it up with wet towels.
Can you move an existing washing line?
Yes, we can relocate it to a better spot. We'll dig out the old socket, fill the hole properly, and install it in the new location. Just make sure the new position gets decent sun and wind.
Do I need to buy the washing line?
You can supply your own or we can source one for you. If you're buying, get a decent quality one - the cheap ones don't last. We'll include the socket, concrete, and all fixings in our quote.
How long before I can use it?
The concrete needs 24-48 hours to cure properly before you load it with washing. We know that's annoying when you've got laundry piling up, but better to wait than have it lean.
Rotary Washing Line Installation Also Available In:
Get a Free Quote in Exeter
Call us today for a free, no-obligation quote for your rotary washing line installation job in Exeter.
01392 964094Request Online QuoteOur Rates
Got multiple jobs?
Make the most of your first hour - I can often tackle several small tasks in one visit. List everything you need done when you call!
Why Trust Us
Need Rotary Washing Line Installation in Exeter?
Get a free quote for your rotary washing line installation job in Exeter today.