Door stop fitting in Exeter
Professional door stop fitting services in Exeter and surrounding areas. Local, reliable handyman - no job too small.
Price Guide
£60
Typical Duration
Under 1 hr
Location
Exeter, Devon
Professional door stop installation in Exeter and Devon. We fit wall stops, floor stops, and skirting-mounted stops to protect your walls from door handle damage. Quick job, lasting results.
Door stops are simple devices but they need fitting in the right place with proper fixings. Too low and the door handle still hits the wall. Too far from the door swing and they don't make contact. Wrong fixings and they pull out after a few impacts.
We position stops at the right height and distance, use fixings appropriate to the wall or floor material, and make sure they actually stop the door where it needs stopping. It's a quick job but worth doing properly.
Door Stop Types
| Stop Type | Best For | Typical Position | Notes |
|---|---|---|---|
| Wall-mounted rubber stop | Most applications | Behind door handle height | Most common, very effective |
| Floor-mounted spring stop | Wide-opening doors, tiled floors | Along door swing path | Won't damage floors |
| Skirting-mounted stop | Discreet installation | On skirting board | Less visible than wall-mounted |
| Hinge pin stop | Inside door frames | On hinge pin | Invisible when door closed |
Surface Types We Fix To
- Plasterboard walls - Need wall anchors or plasterboard fixings
- Solid walls - Drill and plug, very secure
- Wooden surfaces - Screws direct into timber
- Tiled walls/floors - Special drill bits, careful not to crack tiles
Why Choose Us for Door stop fitting in Exeter?
Protects walls and doors
Multiple stop types available
Secure, lasting installation
Prevents handle damage to walls
What to Expect
1. Position Assessment We open the door fully to see where it contacts or would contact the wall. We mark the stop position at the right height (usually level with the door handle or above).
2. Installation We drill pilot holes using the appropriate bit for your wall type, insert wall plugs if needed, and screw the stop securely in place. For floor stops, we position them where the door needs stopping.
3. Testing We test the door opens fully and makes contact with the stop rather than the wall. We adjust position if needed before final tightening.
🔧 DIY Tips
Positioning Basics
- Wall stops should align with door handle height or slightly higher
- Position stops where the door handle would hit without the stop
- Check the door clears the stop when closing (don't mount too far forward)
- For floor stops, account for door swing - they need to catch the door edge
Choosing the Right Stop
- Spring stops for high-traffic areas (they flex and last longer)
- Solid rubber stops for maximum protection (no moving parts)
- Magnetic stops for doors you want held open sometimes
- Hinge pin stops for minimal visual impact
Installation Tips
- Mark position carefully - measure twice, drill once
- Use a detector to check for wires/pipes before drilling
- Plasterboard needs proper anchors (not just screws)
- Tile requires masonry bit at slow speed (prevent cracking)
Common Mistakes
- Mounting too low (handle still hits wall above stop)
- Wrong fixings for wall type (pulls out on first impact)
- Positioning where door binds on stop when closing
- Forgetting to check for pipes behind the wall
Rather leave it to a pro? No problem - that's what I'm here for. Give me a call.
Good to Know
If you have multiple doors needing stops, list them when booking - we can do several in one visit. We carry common stop types but if you've bought specific stops, let us know the mounting method. Magnetic or electromagnetic stops (for fire doors) need different installation approaches. Some very lightweight hollow doors don't generate enough impact to need floor stops - wall protection is usually sufficient. We can remove old stops and fill the holes if you're replacing damaged or wrong-positioned ones.
Frequently Asked Questions
How much does door stop fitting cost?
Door stop fitting is £60 (our minimum charge). Most installations take 10-20 minutes per stop. If you have multiple doors needing stops, we can do them all in one visit within the hour.
What type of door stop is best?
Wall-mounted stops work for most situations and protect walls from door handles. Floor-mounted stops are better for doors that open wide or where wall mounting isn't possible. Skirting-mounted stops are the least obtrusive option.
Can you fit stops on all surfaces?
We fit door stops on walls, floors, and skirting boards in most materials - plaster, brick, wood, tile, and concrete. We use appropriate fixings for each surface type to ensure they hold under impact.
Will the door stop damage my wall or floor?
Quality door stops properly fitted protect your surfaces rather than damage them. We use the right fixings for your wall type and position stops to absorb door impact without transferring force to the mounting surface.
Door stop fitting Also Available In:
Get a Free Quote in Exeter
Call us today for a free, no-obligation quote for your door stop fitting job in Exeter.
01392 964094Request Online QuoteOur Rates
Got multiple jobs?
Make the most of your first hour - I can often tackle several small tasks in one visit. List everything you need done when you call!
Why Trust Us
Need Door stop fitting in Exeter?
Get a free quote for your door stop fitting job in Exeter today.