Fascia cladding in Exeter
Professional fascia cladding services in Exeter and surrounding areas. Local, reliable handyman - no job too small.
Price Guide
Quote required
Typical Duration
1-2 days typical
Location
Exeter, Devon
Professional fascia board cladding in Exeter and Devon. We install UPVC cladding over existing timber fascias or fit new fascia boards to refresh your roofline. Low-maintenance solution that protects your property and eliminates painting.
Timber fascia boards take a beating from Devon weather. They need regular painting and eventually rot at the joints or where water sits. UPVC cladding over sound timber fascias or full replacement with UPVC boards creates a maintenance-free roofline.
We work from scaffolding or ladders depending on height and access. The job involves removing guttering, preparing the existing fascias, fitting the cladding or new boards, and reinstalling the gutters. It's methodical work that needs proper access equipment and attention to detail.
Cladding vs Replacement
| Approach | When Suitable | Typical Cost | Duration |
|---|---|---|---|
| UPVC cladding over timber | Fascias sound but tired | Lower cost | 1-2 days |
| Full fascia replacement | Rotten or damaged fascias | Higher cost | 2-3 days |
| Fascia + soffit cladding | Complete roofline refresh | Quote required | 3-5 days |
| Fascia + new guttering | Updating entire roofline | Quote required | 2-4 days |
What's Involved
Assessment
- Inspect existing fascia condition
- Measure all fascia runs
- Assess access requirements (ladder or scaffold)
- Check gutter condition
Preparation
- Remove guttering carefully
- Prepare existing fascia surface
- Replace any damaged timber if cladding
- Set up safe working access
Installation
- Fit UPVC cladding or new boards
- Ensure proper ventilation maintained
- Make good all joints and corners
- Refit guttering securely
Why Choose Us for Fascia cladding in Exeter?
Maintenance-free UPVC option
Protects existing timber fascias
Improves property appearance
Long-lasting weather protection
What to Expect
1. Survey & Quote We measure all fascia sections, assess their condition, and check access arrangements. We discuss material options (colors, styles) and provide a detailed written quote covering all work.
2. Access Setup We arrange appropriate access equipment (usually our ladders for bungalows and single-story sections, scaffold tower for two-story). We protect the area below the work zone.
3. Cladding Installation We carefully remove gutters (labeled for refitting), prepare the fascias, and install the UPVC cladding boards. We work section by section to maintain weather protection. Gutters are refitted once cladding is complete.
🔧 DIY Tips
Assessment First
- Check fascia boards thoroughly for rot (poke with a screwdriver)
- Rotten fascias MUST be replaced, not clad over
- Examine where gutters attach - common rot area
- Look for wasp nests before starting (common behind fascias)
Material Selection
- UPVC cladding comes in various widths - measure your fascia depth
- White is standard, other colors cost more
- Cheaper UPVC can look plastic - quality matters
- Consider doing soffits at the same time (similar access needed)
When DIY Is Possible
- Single-story or bungalow (safer access)
- You're confident working at height
- Fascias are sound (cladding only, not replacement)
- You have proper ladder/tower equipment
When to Definitely Get a Pro
- Two-story property (height risk)
- Fascias need replacing (structural work at height)
- You're not confident with heights or ladder work
- No proper access equipment available
Common DIY Problems
- Inadequate access equipment (risk of falls)
- Not removing gutters first (impossible to clad behind them)
- Poor joint finishing (water gets behind cladding)
- Blocking soffit ventilation (causes roof space condensation)
Rather leave it to a pro? No problem - that's what I'm here for. Give me a call.
Good to Know
Fascia cladding work requires safe access to your roofline - we need space to position equipment. We usually need to access from both front and rear of the property. Weather affects scheduling - we can't clad fascias in heavy rain. If your existing gutters are old or damaged, it makes sense to replace them while the fascias are being done (saves access costs later). Some properties have complex rooflines with valleys and corners that take longer to clad. We protect plants and ground below the work area but trimming back overhanging vegetation helps. Listed buildings may need planning permission for roofline changes.
Frequently Asked Questions
How much does fascia cladding cost?
Fascia cladding costs vary based on property size, fascia height, and access difficulty. A typical semi-detached house might cost £800-1200 for full cladding. We provide detailed quotes after measuring and assessing access requirements.
Can you clad over existing fascia boards?
Yes, if the existing timber fascias are sound and not rotten. We clad over them with UPVC fascia boards that protect the timber and eliminate future painting. Rotten fascias need replacing rather than cladding over.
How long does fascia cladding last?
Quality UPVC fascia cladding lasts 20-25 years with no maintenance required beyond occasional cleaning. It doesn't rot, warp, or need painting like timber fascias.
Do you handle the guttering as well?
Yes, fascia cladding often requires removing and refitting guttering. We can replace old guttering with new UPVC at the same time if needed, or refit your existing gutters if they're in good condition.
Fascia cladding Also Available In:
Get a Free Quote in Exeter
Call us today for a free, no-obligation quote for your fascia cladding job in Exeter.
01392 964094Request Online QuoteOur Rates
Got multiple jobs?
Make the most of your first hour - I can often tackle several small tasks in one visit. List everything you need done when you call!
Why Trust Us
Need Fascia cladding in Exeter?
Get a free quote for your fascia cladding job in Exeter today.