Fountain installation in Exeter
Professional fountain installation services in Exeter and surrounding areas. Local, reliable handyman - no job too small.
Price Guide
£110-160
Typical Duration
2-3 hrs
Location
Exeter, Devon
Garden fountain installed properly - positioned level, pump set up correctly, electrical connections done safely. Turn it on and it works. No leaks, no bodge jobs.
Transform Your Garden With Moving Water
Nothing beats the sound of running water in a garden. But fountains only look good when they're installed right - wonky fountains spray everywhere except where they should.
💡 Water feature tip: Level placement is everything. Even slightly off-level and the water runs to one side, the bowl empties, and the pump runs dry.
Why Proper Installation Matters
| ✅ Done Right | ❌ Bodged |
|---|---|
| Perfectly level, water flows correctly | Lopsided, water spills out |
| Pump hidden and quiet | Pump visible and noisy |
| Safe outdoor electrics | Extension cable trailing about |
| Spray pattern adjusted properly | Water spraying over the edge |
What You Get
🔧 The Full Service
| Stage | What Happens |
|---|---|
| Position | Level the site and place fountain |
| Connect | Set up pump and electrical supply |
| Test | Run it, adjust spray, check for leaks |
📦 You're Left With
- Fountain level and stable
- Pump running smoothly and quietly
- Safe outdoor electrical connection
- Water flowing exactly where it should
Pricing Guide
| Job Type | Estimated Time | You'll Pay |
|---|---|---|
| Small self-contained fountain | 2 hrs | £110 |
| Standard garden fountain | 2-3 hrs | £110-£160 |
| Large or complex water feature | 3-4 hrs | £160-£210 |
Based on £60 minimum (first hour) + £50/hr after. Fountain unit not included. Additional groundwork quoted separately.
Perfect For Your Garden If...
✅ Relaxing atmosphere - love the sound of water
✅ Wildlife attraction - birds love fountains
✅ Garden focal point - creates visual interest
✅ Pond aeration - keeps pond water oxygenated
Why Choose Us for Fountain installation in Exeter?
Professional pump installation and setup
Safe outdoor electrical connections
Level placement for proper water flow
Tested and working before we leave
What to Expect
Step 1: Site Preparation
Level the area where fountain will sit, ensure stable base, check access to power if needed.
Step 2: Install Fountain
Position fountain level, set up pump and plumbing, run power cable safely to supply.
Step 3: Test and Adjust
Fill with water, run the fountain, adjust spray height and pattern, check for leaks and noise.
🔧 DIY Tips
Want to install it yourself? Here's how:
🔧 Tools you'll need
- Fountain and pump kit
- Spirit level (essential)
- Spade for levelling ground
- Sand or paving slabs for base
- Outdoor electrical cable (if mains powered)
- Bucket for filling
🎯 Installation method
- Level the ground properly - this is critical
- Create stable base (slabs, compacted sand, concrete)
- Position fountain and check level all directions
- Install pump according to manufacturer's instructions
- Run power cable safely (bury or protect it)
- Fill, test, adjust spray pattern
- Check after 24hrs for settling/leaks
⚠️ Common DIY mistakes
- Not levelling properly (water spills, looks awful)
- Pump too powerful (sprays everywhere)
- Unsafe electrical connections (dangerous)
- No base preparation (fountain sinks, goes wonky)
- Forgetting to adjust spray pattern (wastes water)
💡 Pro trick: Set up the fountain, run it for 30 minutes, then check the level again. Ground often settles slightly when first filled with water. Better to catch it early than have it slowly tilt over weeks.
Rather leave it to a pro? No problem - that's what I'm here for. Give me a call.
Good to Know
🎨 Winter care: Most fountains need emptying before frost hits. Frozen water cracks bowls and damages pumps. Either drain it or bring it in for winter.
Solar vs mains: Solar fountains only run when it's sunny - they stop at night and on cloudy days. Mains-powered fountains run constantly (or on a timer). Choose based on how you want to use it.
Pump maintenance: Clean the pump filter every few weeks - debris clogs it and reduces flow. Takes 2 minutes and keeps your fountain running properly.
Frequently Asked Questions
Can you install any type of fountain?
Solar fountains, mains-powered ones, pond fountains, self-contained features - all fine. Each type needs slightly different installation. I'll sort whatever you've bought.
Do I need an outdoor power supply?
Depends on the fountain. Solar ones just need sunlight. Mains-powered fountains need outdoor power - either an existing socket or I can connect to one if it's nearby. Proper waterproof connections, obviously.
How long does installation take?
Usually 2-3 hours for a standard fountain. Position it level, set up the pump, run the power, test it's all working properly, adjust the spray pattern. Bigger features take longer.
Will you level the ground first?
I can do minor levelling with a bit of sand or pavers. If you need serious groundwork or a proper base built, that's extra - I'll quote it when I see what's needed.
Fountain installation Also Available In:
Get a Free Quote in Exeter
Call us today for a free, no-obligation quote for your fountain installation job in Exeter.
01392 964094Request Online QuoteOur Rates
Got multiple jobs?
Make the most of your first hour - I can often tackle several small tasks in one visit. List everything you need done when you call!
Why Trust Us
Need Fountain installation in Exeter?
Get a free quote for your fountain installation job in Exeter today.