Keyboard tray fitting in Exeter
Professional keyboard tray fitting services in Exeter and surrounding areas. Local, reliable handyman - no job too small.
Price Guide
£60-£85
Typical Duration
30-60 mins
Location
Exeter, Devon
Under-desk keyboard tray fitted for better ergonomics and more workspace. Slides out when you need it, tucks away when you don't.
Your Neck and Wrists Will Thank You
Hunched over your keyboard all day? Wrists bent at odd angles? Desk too cluttered because keyboard takes up half the surface?
An under-desk keyboard tray solves all of this - proper typing height, wrists straight, desk clear.
💡 Pro tip: Combine a keyboard tray with a monitor arm for the ultimate ergonomic setup - both get things at the right height for comfortable working.
Why Fit It Properly?
Here's what proper installation looks like vs a bodge:
| ✅ Done Right | ❌ Done Wrong |
|---|---|
| Securely attached to desk underside | Loose, wobbles when typing |
| Level and aligned with your seating position | Off-center, awkward to use |
| Smooth sliding action | Stiff or jams partway |
| Right height for comfortable typing | Too high or low, defeats the point |
What You Get
🔧 Professional Install
| Stage | What Happens |
|---|---|
| Position | Work out best placement under desk |
| Mount | Brackets screwed to underside of desk |
| Attach | Tray mechanism slid onto brackets |
| Adjust | Set height and angle for your comfort |
📦 You're Left With
- Ergonomic keyboard position
- More usable desk space
- Less neck and wrist strain
- Professional, clean install
Pricing Guide
| Job Type | Time | You'll Pay |
|---|---|---|
| Standard keyboard tray | 30-45 mins | £60 |
| Large/complex tray or difficult desk | 45-60 mins | £60-£85 |
Based on £60 minimum (first hour) + £50/hr after. Keyboard tray itself is extra if you need me to supply one.
Perfect For Your Setup If...
✅ Desk work all day - ergonomics actually matter
✅ Neck or wrist pain - better positioning helps
✅ Limited desk space - need surface clear
✅ Home office - professional setup
Why Choose Us for Keyboard tray fitting in Exeter?
Better typing posture and comfort
Frees up desk surface space
Adjustable height and angle
Slides away when not needed
What to Expect
Step 1: Position Planning
We'll work out where the tray should go - centered to your seating position, at the right depth so it doesn't hit your knees.
Step 2: Mount Brackets
Screw mounting brackets to the underside of your desk, making sure they're level and secure.
Step 3: Attach & Adjust
Slide the tray mechanism onto the brackets, set height and angle to suit your typing position, test the sliding action.
🔧 DIY Tips
If you want to fit a keyboard tray yourself:
🔧 Tools you'll need
- Drill/driver
- Pencil for marking
- Tape measure
- Spirit level (optional but helpful)
- Screws (usually supplied with tray)
📐 Getting the positioning right
- Sit at your desk in normal position
- Mark where your keyboard currently sits
- Position tray brackets underneath that area
- Check clearance for your knees/legs when tray's extended
- Ensure it won't hit desk drawers or supports
⚠️ Common DIY mistakes
- Mounting too far back - have to reach forward to type
- Not checking knee clearance - tray hits your legs
- Brackets not level - tray slides to one side
- Over-tightening screws - cracks desk surface
💡 Pro trick: Before drilling, extend the tray mechanism fully and sit at the desk to check positioning feels natural. Much easier to adjust at this stage than after it's mounted.
Rather leave it to a pro? No problem - that's what I'm here for. Give me a call.
Good to Know
🎨 Setting up home office? I can fit keyboard trays, monitor arms, cable management - the full ergonomic setup in one visit.
Desk too thin? Some desks (particularly cheap flatpack) don't have enough meat for secure mounting. I'll assess and advise if it's suitable or suggest alternatives.
Adjustable trays? Most good trays let you adjust height and tilt angle. Worth paying a bit more for this flexibility - everyone's comfortable position is different.
Frequently Asked Questions
Why would I want a keyboard tray?
Two main reasons: ergonomics and desk space. Properly positioned, a keyboard tray lets you type with elbows at 90 degrees and wrists straight - much better than hunching over a keyboard on your desk. Plus it frees up desk surface for papers, coffee, whatever you need.
Can you fit it to my existing desk?
Most desks, yes. I mount the tray to the underside of the desk surface. Needs to be solid enough (wood, chipboard, MDF) - glass or very thin tops won't work. I'll check your desk is suitable before drilling anything.
Will it fit my keyboard and mouse?
Standard keyboard trays hold a keyboard and mouse side-by-side. If you've got a massive gaming keyboard or need extra space, there are wider trays available. Bring measurements of your keyboard or I can measure when I quote.
How high should the keyboard tray sit?
Ideally so your elbows are at 90 degrees when typing - usually a bit lower than desk height. Most trays are adjustable, so we can set it to your preferred height and you can tweak it later if needed.
How long does fitting take?
Usually 30-45 minutes for a standard tray. Mark position, drill pilot holes, attach mounting brackets, slide tray mechanism on, test adjustment. Might take up to an hour if desk is awkward to access or very thick.
Keyboard tray fitting Also Available In:
Get a Free Quote in Exeter
Call us today for a free, no-obligation quote for your keyboard tray fitting job in Exeter.
01392 964094Request Online QuoteOur Rates
Got multiple jobs?
Make the most of your first hour - I can often tackle several small tasks in one visit. List everything you need done when you call!
Why Trust Us
Need Keyboard tray fitting in Exeter?
Get a free quote for your keyboard tray fitting job in Exeter today.