Magnetic door stop fitting in Exmouth

The frustration with doors is they either blow shut when you want them open, or you trip over the chunky stop holding them. Magnetic door stops solve both problems. They're discreet, flush-mounted, and far more sophisticated than rubber wedges or spring-loaded stops.

The system is simple: a small magnetic catch goes on the floor (or wall), and a corresponding steel plate mounts to the bottom of the door. When you swing the door open, the plate catches the magnet and holds firmly. A gentle push releases it. No bending down, no kicking stops around, no tripping hazards.

| Installation Type | Best For | Mounting Surface | Typical Strength | |------------------|---------|------------------|------------------| | Floor-mounted | Most interior doors | Any hard floor | Medium hold | | Wall-mounted | Tight spaces, soft floors | Skirting or wall | Medium hold | | Heavy-duty floor | Fire doors, heavy timber | Concrete or solid floor | Strong hold | | Adhesive floor | Rented properties | Tiles, laminate | Light-medium hold |

The critical part is alignment. If the door plate and floor catch don't line up perfectly, the magnet won't grip properly. We measure carefully, test the door swing arc, and position both components so they connect every time.

Floor type matters. On solid floors (tile, concrete, wood) we can screw the catch down securely. On carpet, we might recommend a surface-mounted option. On laminate or engineered floors, we'll advise whether drilling is appropriate or suggest alternatives.