Shower curtain rail repair in Exeter
Professional shower curtain rail repair services in Exeter and surrounding areas. Local, reliable handyman - no job too small.
Price Guide
£60
Typical Duration
15-30 mins
Location
Exeter, Devon
Shower rail repaired or refitted properly - tightened, secured, or replaced so your curtain actually stays up.
Stop That Sagging Shower Curtain
A shower curtain rail that won't stay up is annoying. Water sprays everywhere, the curtain hangs wrong, and you're constantly pushing it back into place.
I repair shower curtain rails across Exeter - tighten loose ones, replace broken ones, or refit them with proper fixings so they're actually secure.
Common Problems I Fix
| Problem | Likely Cause | The Fix |
|---|---|---|
| Rail falling down | Inadequate wall fixings | Better plugs, longer screws |
| Sagging middle | Rail too weak or span too wide | Support bracket or stronger rail |
| Bracket pulled out | Wall plaster crumbling | Fill hole, drill fresh, stronger fixings |
| Rail bent | Poor quality or overloaded | Replace with better rail |
| Won't stay tight | Tension system failed | Adjust or replace mechanism |
What You Get
🔧 Diagnosis
I'll work out why it's failing - weak wall, poor fixings, bent rail, or just needs tightening.
✅ Proper Fixing
Right plugs for your wall type, secure mounting, tight brackets.
📦 Replacement If Needed
If the rail's damaged beyond repair, I'll fit a new one that'll actually last.
💡 Pro tip: Curved shower rails give you more elbow room in the shower. Worth upgrading if you're replacing anyway - makes a surprising difference.
Why Choose Us for Shower curtain rail repair in Exeter?
Rails secured properly to walls
Sagging curtains fixed
Stronger fixings if needed
Quick, simple repair
What to Expect
Step 1: Assess the Problem
I'll check what's wrong - loose brackets, bent rail, pulled-out fixings, weak wall?
Step 2: Fix or Replace
Tighten and secure if possible, or replace rails/brackets if they're damaged. Use proper fixings for your wall.
Step 3: Test & Tidy
Hang the curtain, pull it along the rail, make sure everything's solid. Clean up dust if I've drilled.
🔧 DIY Tips
🔧 Fixing a loose shower rail yourself?
Worth trying before calling someone:
Quick checks:
- Tighten screws - often they just work loose
- Check wall plugs - if screws turn but don't tighten, plugs have failed
- Test for sag - bent rails won't fix, they need replacing
If refixing:
- Remove rail, check wall plugs are still good
- If holes have enlarged, use bigger plugs or move brackets slightly
- For plasterboard, use proper plasterboard fixings (toggle bolts)
- Tighten firmly but don't over-tighten (cracks tiles or crushes plasterboard)
⚠️ Common DIY mistakes:
- Using same holes that have already failed
- Wrong plugs for wall type (standard plugs in plasterboard won't work)
- Over-tightening and cracking tiles or wall
- Not checking rail is level before final tightening
💡 Pro trick: If wall plugs keep pulling out, move the brackets 5cm to one side and drill fresh holes. Much more secure than trying to reuse failed holes.
Rather leave it to a pro? No problem - that's what I'm here for. Give me a call.
Good to Know
🔧 Plasterboard walls? These need special toggle bolts or cavity fixings. Standard wall plugs just pull straight out when the curtain's pulled. I carry the right fixings.
Curved vs straight rails. Curved rails cost a bit more but give you much more shower space. Worth considering if you're replacing anyway.
Shower over bath? These need longer rails than standard showers. Make sure replacement rail is correct length for your bath.
Cheap vs decent rails. Budget shower rails from supermarkets often bend or break within a year. Spending £20-40 on a decent rail saves refitting it repeatedly.
Frequently Asked Questions
Why does my shower curtain rail keep falling down?
Usually inadequate wall fixings - either wrong plugs for the wall type, or the wall's too weak (plasterboard or old plaster). Sometimes the brackets just work loose over time from pulling the curtain. I'll refix it properly so it stays up.
Can you fix a rail that's sagging in the middle?
Yes - either add a central support bracket, or replace with a stronger rail if the current one's bent. Cheap rails often sag because they're too flimsy for the span. Sometimes just needs tightening at the ends.
Will you damage my tiles when repairing it?
I'll try to use existing holes if possible. If new holes are needed, I drill carefully to avoid cracking tiles. Sometimes the old holes have pulled out of crumbling plaster - I can fill those and drill fresh holes nearby.
How do you stop it pulling out of the wall again?
Better fixings - heavier duty wall plugs, longer screws, or toggle bolts if it's plasterboard. The problem's usually the original installation was done cheaply with inadequate plugs. Fixed properly, it'll stay up.
Can you replace the whole rail if it's broken?
Absolutely - if the rail itself is damaged or bent beyond repair, I can source and fit a new one. Sometimes that makes more sense than trying to fix a cheap broken rail.
Shower curtain rail repair Also Available In:
Get a Free Quote in Exeter
Call us today for a free, no-obligation quote for your shower curtain rail repair job in Exeter.
01392 964094Request Online QuoteOur Rates
Got multiple jobs?
Make the most of your first hour - I can often tackle several small tasks in one visit. List everything you need done when you call!
Why Trust Us
Need Shower curtain rail repair in Exeter?
Get a free quote for your shower curtain rail repair job in Exeter today.