Toilet roll holder fitting in Exeter
Professional toilet roll holder fitting services in Exeter and surrounding areas. Local, reliable handyman - no job too small.
Price Guide
£60
Typical Duration
15-20 mins
Location
Exeter, Devon
Toilet roll holder fitted securely to bathroom walls or tiles. Proper drilling and fixings mean no wobbles or pull-outs.
One Job Everyone Puts Off
Wobbling toilet roll holders are annoying. Either they were never fitted properly, or the fixings have failed. 20 minutes and it's sorted - fitted solid and positioned right.
💡 Pro tip: If you're redoing multiple bathroom accessories (towel rail, toilet brush holder, etc), do them all together - same callout, all done at once.
What You Get
- Old holder removed (if applicable)
- New position marked and checked
- Drilled carefully (tiles won't crack)
- Appropriate fixings for your wall type
- Fitted solid and level
Pricing
£60 - covers toilet roll holder fitting within the minimum callout time.
Additional bathroom accessories fitted in same visit: +£15-20 each
Why Choose Us for Toilet roll holder fitting in Exeter?
Securely fixed to tiles or walls
No damage to tiles from drilling
Right height and position
Won't pull out or wobble
What to Expect
I'll check your wall type, mark the position, drill carefully, use appropriate fixings, fit the holder solid.
🔧 DIY Tips
🔧 You'll need: Tile drill bit (if tiles), appropriate wall plugs, spirit level, masking tape
💡 Getting it right:
- Use masking tape over drill point (stops drill slipping on tiles)
- Start drill slow - don't hammer mode on tiles
- Plasterboard needs cavity fixings, not standard plugs
- Check position before drilling - measure twice, drill once
⚠️ Common mistakes: Wrong drill bit (cracks tiles), standard plugs in plasterboard (pulls out), measuring from wonky floor (holder ends up wonky)
Rather leave it to a pro? No problem - that's what I'm here for. Give me a call.
Good to Know
Renovating your bathroom? Do all your accessory fitting in one go - toilet roll holder, towel rails, robe hooks, etc. More efficient than separate visits.
Frequently Asked Questions
Can you fit it to tiles without cracking them?
Yes - it's about the right technique. Proper tile drill bit, start slow, don't force it. Masking tape over the drill point helps prevent slipping. I do this all the time - tiles stay intact.
What if there's just plasterboard behind the tiles?
Then I use plasterboard fixings (cavity anchors) rated for the weight. Standard rawl plugs pull out of plasterboard. Proper fixings mean it stays put even with heavy use.
How do I know where it should go?
Standard height is about 60-70cm from floor, positioned within easy reach of the toilet. I'll check what works for your bathroom layout and your preferences. Some people want it higher or lower - your call.
What about the old one - can you remove it?
Yes - I'll remove the old holder, fill the old holes neatly, and fit the new one. You're left with no trace of the old mounting holes.
How long does it take?
15-20 minutes if it's straightforward. Longer if I'm removing an old one and filling holes, or if your walls need special fixings. Still well within the £60 minimum callout.
Toilet roll holder fitting Also Available In:
Get a Free Quote in Exeter
Call us today for a free, no-obligation quote for your toilet roll holder fitting job in Exeter.
01392 964094Request Online QuoteOur Rates
Got multiple jobs?
Make the most of your first hour - I can often tackle several small tasks in one visit. List everything you need done when you call!
Why Trust Us
Need Toilet roll holder fitting in Exeter?
Get a free quote for your toilet roll holder fitting job in Exeter today.