Artex removal in Exeter
Professional artex removal services in Exeter and surrounding areas. Local, reliable handyman - no job too small.
Price Guide
£260-£410
Typical Duration
5-8 hrs
Location
Exeter, Devon
Dated artex ceilings scraped smooth or skimmed flat for a modern finish. Safe removal methods, full room protection, and proper plastering that's ready to paint in a few weeks.
Say Goodbye to Those Swirls
That artex ceiling - it's been staring at you for years, hasn't it? Those dated swirls and stipples screaming "1970s" every time you look up.
Getting rid of it properly makes a massive difference to how modern a room feels. Smooth ceilings = instant upgrade.
💡 Pro tip: Not all artex needs removing. Skimming straight over shallow patterns is quicker, cleaner, and cheaper - and the result looks identical.
Removal vs Overskim - What's Best?
Here's the honest truth about your options:
| ✅ Skim Over (Usually Best) | ❌ Full Removal (Sometimes Necessary) |
|---|---|
| Less mess and dust | Very dusty and messy |
| Quicker job (5-6 hrs) | Longer job (full day+) |
| Cheaper | More expensive |
| Works for most patterns | Needed for very deep textures |
| Ceiling slightly lower (unnoticeable) | Ceiling height stays same |
Most jobs I do: Skim straight over. Unless your artex is extremely deep or hiding damaged plaster, this is the sensible approach.
What You Get
🔧 The Artex Removal Process
| Stage | What Happens |
|---|---|
| Assess | Check pattern depth, test for damage, confirm approach |
| Protect | Full room sheeting, furniture covered, dust containment |
| Remove | Carefully scrape artex (if needed), prep surface |
| Plaster | Fresh skim coat applied smooth and level |
| Finish | Mist coat applied, ready for final decoration |
📦 You're Left With
- Completely smooth, flat ceiling
- Mist coat seal (first paint layer)
- Modern finish ready for emulsion
- Clean room (though some fine dust inevitable)
Pricing Guide
| Room Size | Estimated Time | You'll Pay |
|---|---|---|
| Small bedroom | 5-6 hrs | £260-£310 |
| Average living room | 6-7 hrs | £310-£360 |
| Large reception | 7-8 hrs | £360-£410 |
Based on £60 minimum (first hour) + £50/hr after. Overskim only - full scraping adds time. Asbestos testing not included.
Perfect For Your Project If...
✅ 1970s/80s property - instant modern upgrade
✅ Selling your house - buyers hate artex
✅ Pre-decoration - get it done before the decorator arrives
✅ Damaged artex - falling off or cracked anyway, sort it properly
⚠️ Asbestos concerns? Pre-1985 artex may contain asbestos. Get it tested first - I can't remove asbestos-containing materials.
Why Choose Us for Artex removal in Exeter?
Safe removal with dust containment
Smooth plastered finish ready to paint
Asbestos awareness for older properties
Complete transformation from dated to modern
What to Expect
Step 1: Assessment & Protection
I check your artex depth and pattern, confirm the approach (skim over vs remove), and sheet the entire room. Everything gets covered.
Step 2: Prep & Application
If removing, I carefully scrape the artex. If skimming over, I prep the surface. Then fresh plaster goes on smooth and level - this is skilled work.
Step 3: Mist Coat & Cleanup
Once set, I apply a mist coat (seals the new plaster). Clean up is thorough but expect to wipe surfaces - plastering is dusty. Plaster needs 2-3 weeks to dry before final painting.
🔧 DIY Tips
Artex removal is not a great DIY job - it's messy, physical, and the plastering requires skill. But if you're determined:
🔧 Tools you'll need
- Asbestos test kit (for pre-1985 artex)
- Spray bottle or steamer
- Wide scraper/stripping knife
- Dust sheets and masks
- Plasterer's hawk and trowel
- Mist coat paint
⚠️ Check for asbestos FIRST
- If your house was built/decorated before 1985, DO NOT scrape the artex yourself
- Buy an asbestos test kit online (£30-50)
- Send sample to lab
- Only proceed if it comes back negative
- Seriously - asbestos artex requires licensed removal
🔨 The removal process
- Soak the artex with water or steam to soften
- Scrape in sections with a wide blade
- It's exhausting, dusty, horrible work
- The ceiling underneath is often damaged
- You'll need plastering skills to finish it
💡 Honest advice: Unless you're an experienced plasterer, pay someone. The skim coat is where the skill shows - amateur plastering looks awful and you'll just have to pay someone to fix it anyway.
Rather leave it to a pro? No problem - that's what I'm here for. Give me a call.
Good to Know
🎨 Decorating soon? Do the artex removal first. Your decorator can't work around wet plaster, and new plaster needs 2-3 weeks to dry before painting. Get this done, let it cure, then book your decorator.
Multiple ceilings? Doing the whole house together saves on setup time and the per-room cost. Plus you only live through the disruption once.
Older Exeter property? Many Victorian and Edwardian homes had artex added in the 70s/80s. I've worked on dozens - wonky ceilings, lath and plaster underneath, sometimes asbestos. I know what to expect and how to handle it properly.
Frequently Asked Questions
Does artex contain asbestos?
It can do if it was applied before the mid-1980s. I can't remove asbestos-containing artex - that requires licensed specialists. But for post-1985 artex or if you've had it tested and it's clear, I can remove it safely. Most jobs I do are fine, but it's worth knowing about if you're in an older Exeter property.
Can you just plaster over the artex instead of removing it?
Yes - this is actually the easier option and often what I'd recommend. I can skim straight over most artex patterns (not too deep) to create a smooth finish. It's quicker, cheaper, and less messy than full removal. The ceiling ends up slightly lower but you'd never notice.
How messy is artex removal?
Not going to lie - it's dusty work. I use polythene sheeting to protect your room and furniture, but expect some fine dust. The scraping creates mess, then the plastering creates more. I clean up thoroughly, but you'll want to wipe surfaces down afterwards. Overboarding or skimming over is much cleaner if that's an option.
What's the process - removal or overskim?
Depends on the artex depth and your ceiling condition. Shallow patterns get skimmed over. Deep swirls or if the ceiling's damaged underneath might need removal first, then fresh plaster. I'll advise what's best when I see it - sometimes the 'proper' removal isn't worth the extra mess and cost.
How long before I can paint the new ceiling?
Fresh plaster needs at least 2-3 weeks to fully dry before painting with emulsion. Rush it and the paint won't stick properly. I'll leave it with a mist coat (watered-down emulsion) which seals it - your decorator finishes with two proper coats once it's dry.
Artex removal Also Available In:
Get a Free Quote in Exeter
Call us today for a free, no-obligation quote for your artex removal job in Exeter.
01392 964094Request Online QuoteOur Rates
Got multiple jobs?
Make the most of your first hour - I can often tackle several small tasks in one visit. List everything you need done when you call!
Why Trust Us
Need Artex removal in Exeter?
Get a free quote for your artex removal job in Exeter today.