Bidet seat installation in Exeter
Professional bidet seat installation services in Exeter and surrounding areas. Local, reliable handyman - no job too small.
Price Guide
£60-£110
Typical Duration
1-2 hrs
Location
Exeter, Devon
Bidet toilet seats fitted to your existing toilet. I remove the old seat, connect the water supply, mount the bidet seat, and test everything works properly.
The Easy Way To Add A Bidet
Don't have space for a separate bidet? Bidet toilet seats give you the same functionality using your existing toilet. Remove the old seat, fit this instead, connect to your water supply, done. Much simpler than installing a standalone bidet.
💡 Pro tip: If you're getting an electric bidet seat with warm water and heated seat, make sure you've got a socket nearby. They use about the same power as a phone charger, so any nearby socket works fine.
Installation Done Right
These seats have water connections that must not leak:
| ✅ Done Right | ❌ Done Wrong |
|---|---|
| T-piece properly fitted to cistern inlet | Dripping connection, water everywhere |
| Bidet seat level and secure | Wonky, slides around when used |
| Hose connected without kinks | Restricted water flow |
| Electric cable safely routed (if applicable) | Trip hazard, or stretched tight |
| Tested thoroughly before leaving | Leaks discovered after first use |
What You Get
🔧 The Full Service
| Stage | What Happens |
|---|---|
| Remove | Old toilet seat removed |
| Connect | T-piece fitted to cistern water inlet |
| Mount | Bidet seat bracket fitted, seat clipped on |
| Test | Water connections checked, functions tested |
📦 You're Left With
- Bidet seat securely mounted
- Water supply connected leak-free
- All functions working properly
- Old seat removed and binned
- Instructions for using the controls
Pricing Guide
| Job Type | Estimated Time | You'll Pay |
|---|---|---|
| Non-electric bidet seat | 1 hr | £60 |
| Electric bidet seat (socket already nearby) | 1.5 hrs | £85 |
| Electric bidet seat + arrange electrician for socket | 2 hrs + electrician | £110 + electrical work |
Based on £60 minimum (first hour) + £50/hr after. Doesn't include the bidet seat itself or any electrical work.
Perfect For Your Project If...
✅ No space for bidet - want bidet function without extra fixture
✅ Elderly or mobility issues - easier than using toilet paper
✅ Bathroom upgrade - modern convenience without full renovation
✅ Environmental - reduce toilet paper usage
Why Choose Us for Bidet seat installation in Exeter?
Fitted to your existing toilet
Water supply connected properly
Electric connection if required (via qualified electrician)
Tested and working before completion
What to Expect
Step 1: Remove Old Seat
Your existing toilet seat comes off - just two bolts underneath. Out it comes.
Step 2: Fit T-Piece
I turn off your toilet water supply, disconnect the fill hose from the cistern, fit a T-piece connector, reconnect everything. This gives us a tap-off for the bidet seat.
Step 3: Mount Bidet Seat
The bidet seat comes with a mounting bracket that fixes where your old seat was. I fit that securely, then clip the bidet seat onto it.
🔧 DIY Tips
Bidet seat installation is manageable DIY if you're careful:
🔧 Tools you'll need
- Adjustable spanner or pliers
- Screwdriver (for seat fixing bolts)
- Bucket and cloth (for water spillage)
- PTFE tape
💧 The process
- Turn off toilet water - valve usually below cistern
- Flush toilet - empty cistern
- Remove old seat - two bolts underneath
- Disconnect fill hose - from bottom of cistern
- Fit T-piece - connects cistern, fill valve, and bidet hose
- Mount bidet seat - bracket first, then clip seat on
- Connect water hose - from T-piece to bidet seat
- Turn water back on - check for leaks
- Test all functions - make sure everything works
⚠️ Common DIY mistakes
- Not turning water off properly (wet floor fast)
- Cross-threading the T-piece (leaks immediately)
- Forgetting PTFE tape on threads
- Mounting bracket wonky (seat doesn't sit straight)
- Not testing before tightening everything (have to undo it all)
💡 Pro trick: When fitting the T-piece, hand-tighten first, turn water on gently to check for leaks, then tighten properly if needed. Easier than tightening blind and hoping.
Read the instructions - bidet seats vary in how they mount and connect. Some have quick-disconnect fittings, others need tools. Five minutes reading beats an hour of guessing.
Rather leave it to a pro? No problem - that's what I'm here for. Give me a call.
Good to Know
🔌 Electric vs non-electric - Non-electric ones use water pressure to spray (cold water only). Electric ones heat the water, have heated seats, air dryers, and more features. Electric costs more but much more comfortable, especially in winter.
Water pressure matters - These work best with decent water pressure. If you've got weak flow, the spray won't be strong enough. Most need at least 0.5 bar, some need 1 bar+. Check the specs before buying.
Round vs elongated - Toilets come in round-front and elongated-front. Your bidet seat needs to match. Measure your toilet bowl or check the manufacturer before ordering.
Compatibility with your toilet - Most fit standard two-piece toilets (separate tank and bowl). One-piece toilets, wall-hung toilets, or toilets with unusual shapes might not be compatible. Check before buying.
Frequently Asked Questions
What's a bidet toilet seat?
It's a replacement toilet seat with built-in bidet function - sprays water for cleaning. Some are just mechanical (water pressure operated), others are electric with heated seats, warm water, and air dryers. Much easier than installing a separate bidet.
Can you fit a bidet seat to any toilet?
Most modern close-coupled toilets, yes. I remove your existing seat, connect a water supply T-piece to the cistern inlet, fit the bidet seat, connect it up. Won't work on old-style toilets with separate high-level cisterns or some wall-hung toilets.
Do electric bidet seats need special wiring?
They need a standard 13A socket nearby. If you haven't got one, that's an electrician job first (I can arrange that if needed). The bidet seat just plugs in like any appliance. Non-electric ones just need the water connection.
How long does fitting a bidet seat take?
Non-electric seat on a standard toilet is usually an hour - remove old seat, fit T-piece to water supply, mount new seat, connect, test. Electric ones might take longer if we're also sorting the power supply.
Will it look weird on my toilet?
They're bulkier than normal seats because they house the mechanism, but modern ones look pretty sleek. Come in round and elongated to match your toilet bowl. Most people get used to the look fast once they experience the functionality.
Bidet seat installation Also Available In:
Get a Free Quote in Exeter
Call us today for a free, no-obligation quote for your bidet seat installation job in Exeter.
01392 964094Request Online QuoteOur Rates
Got multiple jobs?
Make the most of your first hour - I can often tackle several small tasks in one visit. List everything you need done when you call!
Why Trust Us
Need Bidet seat installation in Exeter?
Get a free quote for your bidet seat installation job in Exeter today.