Pedestal sink fitting in Exeter
Professional pedestal sink fitting services in Exeter and surrounding areas. Local, reliable handyman - no job too small.
Price Guide
£110-£160
Typical Duration
1.5-2.5 hrs
Location
Exeter, Devon
Fitting a traditional pedestal sink - basin fixed to wall, pedestal supporting it, everything plumbed in properly and sealed tight.
The Classic Bathroom Look
Pedestal sinks never go out of style. Clean, traditional, and they suit any bathroom from Victorian terraces to modern builds. But they need fitting properly - level, secure, and with all the plumbing done right.
I fit pedestal sinks regularly. Wall fixings that'll hold, pipework that doesn't leak, everything aligned properly so it looks right and lasts for years.
💡 Pro tip: The pedestal doesn't actually hold much weight - it's mainly hiding the pipework. The basin itself needs to be properly fixed to the wall. Cheap wall fixings = cracked basin later.
What's Involved in Fitting One
| Stage | What Happens |
|---|---|
| Position | Mark where basin and pedestal go, check levels |
| Fix basin | Secure to wall with proper fixings for your wall type |
| Plumb in | Connect hot & cold supply, fit waste & trap |
| Fit pedestal | Position under basin, fix to floor if needed |
| Seal | Silicone around edges, test for leaks |
What You Get
🔧 The Installation
| Stage | What Happens |
|---|---|
| Remove old | Take out existing basin/sink if needed |
| Fit new basin | Level it, fix it securely to wall |
| Connect all plumbing | Hot, cold, waste - all tested |
📦 You're Left With
- Basin fitted level and secure
- All taps and waste working
- Pedestal supporting and hiding pipes
- Silicone sealed, tested for leaks
Pricing Guide
| Job Type | Estimated Time | You'll Pay |
|---|---|---|
| Swap like-for-like | 1.5 hrs | £85-£110 |
| New installation | 2-2.5 hrs | £110-£135 |
| Complex (move position, new pipework) | 2.5-3 hrs | £135-£160 |
Based on £60 minimum (first hour) + £50/hr after. Basin/pedestal not included.
Perfect For Your Situation If...
✅ Bathroom renovation - want that traditional basin look
✅ Replacing wall-hung - prefer the classic pedestal style
✅ Small bathroom - don't need storage under the sink
✅ Period property - suits the style of the house
Why Choose Us for Pedestal sink fitting in Exeter?
Properly supported and level
All plumbing & waste connected
Sealed to wall, no leaks
Old basin removed if needed
What to Expect
Step 1: Remove Old (If Needed)
If you've got an existing sink or basin, I disconnect everything and take it out. Check what state the wall and pipework is in.
Step 2: Position & Fix Basin
Mark up where the basin needs to be, making sure it's level even if your walls aren't. Fix it securely to the wall with proper fixings for your wall type.
Step 3: Plumb Everything In
Connect hot and cold supply, fit the waste and P-trap, position the pedestal underneath. Test it all thoroughly, seal with silicone where needed.
🔧 DIY Tips
This is a more involved job than some plumbing tasks, but doable if you're confident:
🔧 Tools you'll need
- Spirit level
- Drill and appropriate wall plugs
- Adjustable spanners
- Silicone sealant and gun
- PTFE tape
- Pencil for marking
- Helper (basins are awkward alone)
🚰 Fitting a pedestal sink
- Turn off water supply
- Position basin at right height (usually 800-850mm)
- Mark wall through fixing holes
- Drill and plug wall
- Hang basin temporarily, slide pedestal under to check fit
- Fix basin to wall properly
- Connect taps and waste
- Position pedestal and fix to floor if you want
- Seal around basin edge with silicone
- Turn water back on and test
⚠️ Common DIY mistakes
- Wrong wall fixings (pull out or crack the basin)
- Not getting it level (looks awful)
- Forgetting the pedestal isn't load-bearing
- Plumbing connections not tight enough (drips later)
- Using too much silicone (messy finish)
💡 Pro trick: When you're positioning the basin, slide the pedestal underneath BEFORE you mark the fixing holes. This ensures everything will actually line up when you're done. I've seen people fix the basin then find the pedestal doesn't fit underneath properly.
🔩 Wall fixings matter:
- Solid wall: wall plugs and screws
- Stud wall: must fix into studs or use specialist plasterboard fixings
- Tile: drill through tile carefully with tile bit first
- Hollow wall: heavy-duty plasterboard anchors rated for the weight
Rather leave it to a pro? No problem - that's what I'm here for. Give me a call.
Good to Know
🏠 Older Exeter houses: Walls often aren't flat or vertical, and floors aren't level. I use spirit levels and packers to make everything sit right. The final result looks level - that's what matters.
Removing the old basin? I'll disconnect and take it away if you want. If it's still in good nick, you might want to sell it or donate it - Victorian or Edwardian basins can be worth keeping.
Taps supplied separate? Most pedestal sinks come without taps. You'll need to buy those separately - I can advise on what'll fit your basin and look right. Or if you've already got taps, I'll fit them at the same time.
Frequently Asked Questions
Do pedestal sinks need to be fixed to the wall as well as the floor?
Yes - the basin fixes to the wall and takes most of the weight. The pedestal just hides the pipework and provides a bit of support. I fix both securely, making sure it's all level and properly aligned. In older houses with wonky walls, this takes a bit more care.
Can you fit a pedestal sink if the old basin was wall-hung?
Usually yes, but I'll need to connect the waste differently and make sure there's a suitable water supply. Sometimes the old wall-hung basin was higher up, so there might be marks on the wall that need dealing with. I'll work around it or advise on touching up the wall first.
Do I need to provide the sink or can you supply it?
Either way works. If you've already bought one, I'll fit it. If not, I can advise on what'll work in your space and pick one up from the local merchant - saves you the hassle and I know which ones are decent quality versus cheap rubbish.
How long before I can use the sink after you fit it?
You can use it straight away - I test everything before I leave. The only wait is if I've used silicone sealant around the edges - that's best left for 24 hours before getting it properly wet, but the plumbing itself is ready to go immediately.
What if my bathroom floor or walls aren't level?
Welcome to every old house in Exeter! I use a spirit level and packers to get the sink sitting level even when the floor or walls aren't. It's all about making it look right and work properly - nobody will know your floor slopes unless they bring a spirit level.
Pedestal sink fitting Also Available In:
Get a Free Quote in Exeter
Call us today for a free, no-obligation quote for your pedestal sink fitting job in Exeter.
01392 964094Request Online QuoteOur Rates
Got multiple jobs?
Make the most of your first hour - I can often tackle several small tasks in one visit. List everything you need done when you call!
Why Trust Us
Need Pedestal sink fitting in Exeter?
Get a free quote for your pedestal sink fitting job in Exeter today.