Christmas tree stand assembly in Exeter
Professional christmas tree stand assembly services in Exeter and surrounding areas. Local, reliable handyman - no job too small.
Price Guide
£60
Typical Duration
30 mins
Location
Exeter, Devon
Christmas tree stand assembled and positioned level in your chosen spot. Tested for stability - ready to receive your tree without any faffing about with instructions and Allen keys.
The Box of Mystery Parts
You buy a nice tree stand with good water capacity and proper securing screws. Get it home. Open the box.
Seventeen pieces. Instructions in Chinese and sort-of English. Three different sizes of screws. An Allen key that doesn't quite fit. Thirty minutes of your life you're not getting back.
💡 Pro tip: The stand needs to be assembled RIGHT. Loose screws or wonky base means unstable tree. Better to get it done properly once than reassemble it three times.
Just Get It Ready
Sixty quid, half an hour, stand assembled correctly and positioned level. Ready for your tree to slot straight in. No instructions, no mystery hardware, no wondering if you've done it right.
| ✅ Professional Assembly | ❌ DIY Stand Assembly |
|---|---|
| Assembled correctly first time | "Why are there screws left over?" |
| Positioned level (shimmed if needed) | Wobbles on uneven floor |
| All parts tightened properly | Comes loose when you tighten tree screws |
| Ready to use immediately | Hour of cursing at instructions |
What You Get
🔧 The Full Service
| Stage | What Happens |
|---|---|
| Unpack | Check all parts present, identify components |
| Assemble | Put stand together following manufacturer instructions |
| Position | Place in your chosen spot, check level |
| Shim | Add small wedges if floor is uneven |
| Test | Check stability and all screws work properly |
📦 You're Left With
- Fully assembled stand (no loose parts)
- Positioned level (ready for tree)
- Tested and stable (won't tip)
- Instructions saved (just in case, though you won't need them)
Pricing Guide
| Scenario | Estimated Time | You'll Pay |
|---|---|---|
| Standard stand assembly + positioning | 30 mins | £60 |
| Complex stand or multiple stands | 45 mins | £60 |
| Stand assembly + full tree setup | 1-2 hrs | £60-£110 |
Fixed £60 for stand assembly alone. Most people combine with tree setup service.
Perfect For Your Project If...
✅ Bought a flat-pack stand - can't face the assembly process
✅ New stand type - never used one like this before
✅ Wonky floors - old house, nothing is level
✅ Getting tree soon - want stand ready to go
Why Choose Us for Christmas tree stand assembly in Exeter?
Stand assembled correctly from box
Positioned level in your chosen spot
Tested for stability before you get the tree
Ready to receive tree - no faffing required
What to Expect
Step 1: Check Components
Open the box, check all parts are there (missing screws are surprisingly common). Identify which bit goes where.
Step 2: Assemble
Put the stand together following the instructions properly. Get screws tight, make sure water reservoir is correctly positioned.
Step 3: Position & Level
Put stand where you want your tree, check it's level (use shims on wonky floors if needed). Test the tree-securing screws work smoothly.
🔧 DIY Tips
Want to assemble it yourself? Here's how:
🔧 Tools you'll need
- Usually just the Allen key provided
- Sometimes screwdriver (check instructions)
- Spirit level (really helps)
- Small wedges or cardboard (for shimming on uneven floors)
- Patience (flat-pack instructions are universally terrible)
📐 Assembly tips
- Lay out all parts before starting
- Count screws and check against instructions
- Don't fully tighten anything until whole stand is assembled
- Check it sits flat on the floor before final tightening
- Test tree-grip screws work before putting tree in
- Make sure water reservoir is accessible
💧 Stand types
- Basic tripod: Cheap, small water capacity, works for small trees
- Bowl/bucket type: Good water reservoir, stable, suits most trees
- Self-watering: More complex, larger reservoir, worth it for big trees
- Rotating: Fancy but unnecessary unless you want to rotate tree to hide bare side
⚠️ Common mistakes
- Over-tightening screws during assembly (strip the threads)
- Not checking stand sits flat before putting tree in
- Forgetting to position on level ground
- Assembling with screws in wrong holes (read instructions)
- Not testing tree-grip screws before tree goes in
💡 Pro trick: Put a large tray or plastic sheet under the stand before you put the tree in. Catches any water spillage and makes it easy to slide the stand if you need to adjust position later.
Rather leave it to a pro? No problem - that's what I'm here for. Give me a call.
Good to Know
🎨 Getting the tree at the same time? Most people book stand assembly as part of full tree setup service. I assemble the stand, position and level it, then put the tree in and secure it properly. One visit, everything done.
Stand sizing: As a rough guide:
- 5-6ft tree: basic stand is fine
- 7-8ft tree: decent stand with good water capacity
- 9ft+ tree: heavy-duty stand (cheap ones won't hold it)
Floor protection: Consider putting something under the stand - plastic tray, old towel, waterproof mat. Real trees can leak water if you overfill the reservoir.
Old Exeter houses: Floors in Victorian/Edwardian houses are rarely level. I'll shim the stand to compensate so your tree stands straight even if your floor doesn't.
Storage after Christmas: Don't disassemble the stand when you pack it away - store it assembled. Next year is then a two-minute job instead of re-reading those terrible instructions.
Frequently Asked Questions
Do Christmas tree stands really need assembling?
Some do, some don't. The cheap ones are one piece. Nicer stands (bigger water reservoir, better grip) often come flat-packed with screws and parts. Takes 20-30 minutes to put together properly - or you can pay me sixty quid and I'll sort it.
Can you help choose the right stand?
If you've not bought one yet, tell me your tree size and I can advise. Too small and the tree falls over. Too big and the tree rattles around. Need the right match.
What about positioning it level?
Yeah, that's half the job. Floors in old houses are never level. I'll position the stand and shim it if needed so when your tree goes in, it stands straight.
Do I need a fancy stand?
Basic stands work fine for small trees. Bigger trees (7ft+) need decent stands with bigger water reservoirs and better screw grip. Worth spending a bit more - cheap stands are frustrating.
Can you do this as part of full tree setup?
Absolutely - most people book stand assembly as part of the full tree setup service. Makes sense to do it all together rather than two separate visits.
Christmas tree stand assembly Also Available In:
Get a Free Quote in Exeter
Call us today for a free, no-obligation quote for your christmas tree stand assembly job in Exeter.
01392 964094Request Online QuoteOur Rates
Got multiple jobs?
Make the most of your first hour - I can often tackle several small tasks in one visit. List everything you need done when you call!
Why Trust Us
Need Christmas tree stand assembly in Exeter?
Get a free quote for your christmas tree stand assembly job in Exeter today.