Garden hose setup spring in Exeter
Professional garden hose setup spring services in Exeter and surrounding areas. Local, reliable handyman - no job too small.
Price Guide
£60
Typical Duration
45-60 mins
Location
Exeter, Devon
Garden hose connected properly and checked for leaks before summer. I sort out your outside tap, connect the hose, check fittings, and make sure everything works - so you're ready when the garden actually needs watering.
Before The Hosepipe Ban Arrives
That outside tap hasn't been touched since September. Hose is coiled somewhere in the shed. End fittings are probably perished.
Then suddenly it's 25°C and the garden's gasping.
You wrestle the hose out, connect it up, turn on the tap... and water's going everywhere except where you want it.
💡 Pro tip: Outside taps that sit unused through Devon winters often develop washer problems. A £2 washer replacement now beats a flooded patio in July.
Why This Actually Matters
Because discovering your hose setup is buggered when you desperately need water is infuriating.
| ✅ Sorted Properly | ❌ Summer Surprise |
|---|---|
| Tap checked, washer replaced if needed | Dripping tap wasting water |
| All connections leak-free | Spraying water everywhere |
| Hose checked for winter damage | Split hose discovered mid-use |
| Reel mounted at useful height | Hose tangled on ground |
What Gets Done
🔧 The Full Hose Setup
| Item | What Happens |
|---|---|
| Outside Tap | Check operation, replace washer if dripping, ensure it's not seized |
| Hose | Inspect for splits/perishing, check end fittings, replace if needed |
| Connections | Proper fittings that don't leak, correct adapters for your tap |
| Hose Reel | Mount securely if you've got one, position sensibly |
📦 You're Left With
- Working tap that doesn't drip
- Leak-free connections
- Hose that reaches where you need it
- Everything ready to use immediately
Pricing Guide
| What's Needed | Estimated Time | You'll Pay |
|---|---|---|
| Basic connection + check | 30-45 mins | £60 |
| Including hose reel mount | 45-60 mins | £60 |
| Tap washer replacement too | 60 mins | £60 |
Based on £60 minimum (first hour). Tap replacement is a different job. Basic fittings included; new hose or fancy reel is extra.
Perfect Timing If...
✅ First warm weekend - sort it before you need it
✅ New hose reel - get it mounted properly
✅ Moving in - previous owner's setup is anyone's guess
✅ Pre-summer prep - one less job when it gets hot
Why Choose Us for Garden hose setup spring in Exeter?
Hose properly connected and leak-free
Outdoor tap checked after winter
Reel mounted if you've got one
Fittings replaced if they're perished
What to Expect
Step 1: Tap Check
First thing is checking your outside tap actually works properly. I'll turn it on, check for drips, feel if it's seized or stiff. If the washer's gone, I'll replace it - saves water and prevents damage.
Step 2: Hose Connection
Connect hose to tap with proper fittings that don't leak. Check the hose itself for damage - splits, perished ends, crushed sections. If you've got a spray gun or sprinkler, that gets tested too.
Step 3: Final Check
Turn everything on and check for leaks anywhere in the system. If you're getting a reel mounted, that happens now - positioned where it's actually useful and the hose reaches your garden.
🔧 DIY Tips
Want to sort your own hose setup? Here's how:
🔧 Tools and bits you'll need
- Adjustable spanner
- New tap washer (1/2" usually, but check)
- Hose end connectors (quick-release are worth it)
- PTFE tape
- Hose reel (if mounting one)
- Wall plugs and screws (if mounting reel)
🚰 Checking the outside tap
- Turn it on gently - if it's stiff, don't force it
- Check for drips when fully closed
- Check the body of the tap for cracks (frost damage)
- If it drips, turn off your inside stop tap and replace the washer
- Apply a tiny bit of silicone grease to the spindle if it's stiff
💧 Hose and fittings
- Inspect entire length for splits or damage
- Check end fittings aren't perished or cracked
- Get quick-release fittings - life's too short for screw-on connectors
- Make sure you've got the right adapter for your tap thread
- Use PTFE tape on threaded connections (prevents leaks)
⚠️ Common DIY mistakes
- Forcing a seized tap - you'll snap something
- Overtightening plastic fittings - they crack
- Cheap connectors that leak from day one
- Not checking the entire hose before connecting it up
- Mounting hose reel where hose won't actually reach the garden
💡 Pro trick: Store hoses indoors over winter if you can - even "all-season" hoses last longer. Empty the hose completely after last use (lift it up high to drain) - standing water inside causes perishing. And turn off the inside isolation valve for your outside tap in winter - prevents burst pipes in cold snaps.
Rather leave it to a pro? No problem - that's what I'm here for. Give me a call.
Good to Know
🌱 Old Exeter houses? Outside taps in older properties sometimes don't have isolation valves inside. Worth getting one fitted - means you can turn off the outside tap in winter without affecting the whole house supply.
Getting a new hose? Don't go cheapest - they split fast. Mid-range branded hose lasts 5-10 years with decent care. Get one long enough to reach your furthest flower bed without being so long it's annoying to wind up.
No outside tap yet? That's a different job (outside tap installation), but now's the time to get it sorted before summer. Much easier to water plants with a hose than carrying cans from the kitchen sink.
Frequently Asked Questions
What exactly needs setting up?
After winter, outside taps often develop issues - washers perish, connections leak, hoses have split. I connect everything up, check for leaks, replace any dodgy fittings, and make sure water actually reaches the end of your hose without spraying everywhere en route.
Can you fit a new hose reel while you're there?
Yes - that's actually the perfect time to do it. Mount the reel properly on the wall, connect it up, check it winds smoothly, and position it so the hose actually reaches where you need it. Much neater than hose snaking across the patio.
My outside tap hasn't been used since last summer - is that a problem?
Possibly. Devon winters can cause washers to perish and connections to seize. I'll check the tap itself, replace the washer if needed, make sure it's not leaking, and get it working smoothly again. Better to find problems now than when you're trying to water plants in a heatwave.
Do I need to buy a new hose?
I'll check yours first. If it's split or perished, yes. If it's just needs new end fittings, I can sort that. Most hoses are repairable if the main body is sound - no point replacing a whole hose for a £3 fitting. I'll advise honestly on what's needed.
How long does it take?
Simple connection and leak check? 30-45 minutes. Adding a hose reel mount or dealing with a seized tap? Up to an hour. If the tap itself needs replacing that's a different job, but I'll let you know on the day.
Garden hose setup spring Also Available In:
Get a Free Quote in Exeter
Call us today for a free, no-obligation quote for your garden hose setup spring job in Exeter.
01392 964094Request Online QuoteOur Rates
Got multiple jobs?
Make the most of your first hour - I can often tackle several small tasks in one visit. List everything you need done when you call!
Why Trust Us
Need Garden hose setup spring in Exeter?
Get a free quote for your garden hose setup spring job in Exeter today.