Fluorescent tube replacement in Exeter
Professional fluorescent tube replacement services in Exeter and surrounding areas. Local, reliable handyman - no job too small.
Price Guide
£60
Typical Duration
20-30 mins
Location
Exeter, Devon
Fluorescent tube replaced in garage, kitchen, or workshop fitting. Right size tube fitted properly, starter checked, everything tested - your light working again without you having to wrestle with fragile tubes on a ladder.
Fluorescent Tubes Are Annoying
They're long, fragile, awkward, and usually high up. Getting the old one out without smashing it is a skill. Getting the new one twisted into the holders while balanced on a stepladder is worse.
Then sometimes the new tube doesn't work because the starter's dead. Or you bought the wrong size. Or it's actually the ballast that's failed.
💡 Just call someone: You avoid broken tubes, wrong purchases, ladder mishaps, and wasted time.
What's Involved
🔧 The Process
| Stage | What Happens |
|---|---|
| Remove | Safely extract old tube without breaking it |
| Check | Test if it's just the tube or if starter/ballast needs work |
| Fit | Install correct new tube |
| Test | Switch on, confirm it works |
Common Issues
| Problem | Cause | Fix |
|---|---|---|
| New tube flickers | Starter worn out | Replace starter too |
| Doesn't light at all | Ballast failed | Might need electrician, or LED retrofit |
| Wrong size | Didn't measure properly | Get correct tube |
| Tube smashes | Dropped during fitting | Careful handling + cleanup |
Tube Types
T8 (most common)
- 26mm diameter
- Standard fluorescent
- 2ft, 4ft, 5ft, 6ft lengths
T12 (older fittings)
- 38mm diameter (fatter)
- Being phased out
- Often worth LED conversion
LED retrofit
- Direct replacement for fluorescent
- Lower running costs
- Last much longer
- Sometimes needs rewiring
Why People Call For This
| The Situation | Why It Makes Sense |
|---|---|
| High fitting | Don't fancy ladder + fragile tube combo |
| Awkward location | Garage ceiling, over workbench, tight space |
| Not sure what size | Avoid buying wrong tube |
| Previous tube smashed | Don't want to repeat that experience |
Pricing Guide
| What's Needed | Estimated Time | You'll Pay |
|---|---|---|
| Simple tube replacement | 20 mins | £60 |
| Tube + starter replacement | 25 mins | £60 |
| Multiple tubes (garage/workshop) | 20 mins per tube | £60 |
| LED retrofit advice/installation | 30-45 mins | £60-£85 |
Based on £60 minimum (first hour) + £50/hr after. Tubes/starters extra if I'm supplying them.
This Service Is Perfect If...
✅ High ceilings - ladder work you'd rather avoid
✅ Multiple tubes - garage or workshop with several
✅ Unsure what you need - let me measure and source
✅ Previous bad experience - dropped and smashed tubes
Why Choose Us for Fluorescent tube replacement in Exeter?
Tube changed without breaking it
Right type fitted first time
Starter replaced if needed
Tested and working before leaving
What to Expect
Step 1: Access & Remove
Get to the fitting safely (ladder if needed). Carefully twist and remove old tube. Check starter while I'm there.
Step 2: Identify & Source
If you've got replacement tube, fit it. If not, measure the old one and source correct replacement. Can usually get standard sizes same day.
Step 3: Fit & Test
Install new tube, replace starter if needed. Switch on, check it lights properly. Clean up any debris from old tube.
🔧 DIY Tips
Want to change it yourself? Here's the safe way:
🔧 What you'll need
- Correct replacement tube (measure old one first)
- Stepladder or sturdy chair
- Someone to help/spot you (safer)
- Bin bag for old tube (they're fragile)
📐 Changing the tube
- Switch off power at switch (double-check)
- Get stable on ladder/chair
- Twist old tube 90 degrees (quarter turn)
- Pull gently out of holder clips
- Lower carefully - don't drop it
- Check starter while fitting is accessible
- Line up new tube with holders
- Push in and twist 90 degrees to lock
- Switch on and test
⚠️ Common mistakes
- Not switching off (bright flash if you touch contacts)
- Twisting wrong direction (they only go one way)
- Forcing it (gentle pressure, it should clip easily)
- Dropping the old tube (wear shoes, not barefoot)
💡 Pro trick: Put the old tube straight into the packaging from the new tube for safe disposal. Keeps it contained if it breaks. Fluorescent tubes contain small amounts of mercury, so try not to smash them.
Rather leave it to a pro? No problem - that's what I'm here for. Give me a call.
Good to Know
🎨 Garage/workshop lighting? If you're changing one tube, others are probably near end of life too. Worth considering replacing all at once - I'm already there, already up the ladder. Plus they'll all match (new tubes are brighter than old ones).
LED conversion: If your fluorescent fitting is old or you're changing tubes regularly, LED retrofit might make sense. Higher upfront cost but lower running costs and 5-10 year lifespan instead of 1-2 years.
Starter replacement: If your new tube flickers or takes ages to come on, it's usually the starter. Little cylinder that twists in/out like the tube. Costs about £2, takes 30 seconds to replace.
Disposal: Don't just chuck old fluorescent tubes in the bin - they contain mercury. Take them to recycling center or some council tips have special bins. Or I can dispose of them properly.
Frequently Asked Questions
Why is changing a fluorescent tube tricky?
They're long, fragile, awkward to twist into the holders, and you're usually on a ladder/stepladder doing it. Easy to drop and smash. Plus if the old tube is stuck or the starter needs replacing too, it gets complicated. I'll do it safely and get the right replacement.
What size tube do I need?
Measure the old one (common sizes are 2ft, 4ft, 5ft, 6ft) and note the thickness. Bring me the old tube if you're unsure - I can match it. Also need to know if it's T8, T12, or LED retrofit.
Can you convert to LED?
Sometimes yes - some fittings work with LED tubes as direct replacements. Others need rewiring. I'll assess your fitting and advise. LED uses less electricity and lasts longer but initial cost is higher.
Do I need to buy the tube first?
Either way works. If you've got the right one, I'll fit it. If not, I can measure and get the correct tube - saves you buying the wrong size or type.
What if the new tube doesn't work?
Often the starter needs replacing too (small cylindrical thing that twists in). Or the ballast is faulty. I'll diagnose and fix properly - might just be tube, might need more work. I'll tell you before doing anything.
Fluorescent tube replacement Also Available In:
Get a Free Quote in Exeter
Call us today for a free, no-obligation quote for your fluorescent tube replacement job in Exeter.
01392 964094Request Online QuoteOur Rates
Got multiple jobs?
Make the most of your first hour - I can often tackle several small tasks in one visit. List everything you need done when you call!
Why Trust Us
Need Fluorescent tube replacement in Exeter?
Get a free quote for your fluorescent tube replacement job in Exeter today.