Immersion heater check in Crediton
Looking for professional immersion heater check help in Crediton? Hembury Contracting provides reliable small jobs services across Crediton and surrounding areas.
Price Guide
£60
Typical Duration
15-30 mins
Location
Crediton
Immersion heater tested to find out if it's working properly. Element checked, thermostat tested, honest diagnosis of what's wrong if anything.
### When Hot Water Stops Being Hot
Water taking hours to heat up? Never getting properly hot? Electricity bill massive but no hot water? **Something's wrong with the immersion heater** - question is what.
> 💡 **Pro tip:** Before calling anyone, check the timer is actually turning the immersion on. Sounds obvious but it's often that simple.
---
### Guessing vs. Proper Testing
"Maybe it's broken" isn't a diagnosis:
| ✅ Proper Check | ❌ Guessing | |----------------|------------| | Test element with multimeter | Assume it's dead | | Check thermostat settings | Hope adjusting fixes it | | Verify it's getting power | Replace things randomly | | Honest diagnosis | Spend money on wrong parts |
Twenty minutes to know exactly what's wrong vs. weeks of cold showers.
---
### What You Get
**🔧 The Service**
| Step | What Happens | |------|--------------| | **Power Check** | Verify immersion is getting electricity | | **Element Test** | Check element has continuity (or is dead) | | **Thermostat** | Test trips at correct temperature | | **Diagnosis** | Honest assessment - simple fix or proper work needed |
**📦 You're Left With** - Understanding what's wrong - Advice on whether to repair or replace - Thermostat adjusted if that fixes it - Quote for repair if needed
---
### Pricing Guide
| Service | Estimated Time | You'll Pay | |---------|----------------|------------| | Basic immersion check | 15-20 mins | **£60** | | Check + thermostat adjustment | 20-30 mins | **£60** | | Check + diagnose complex fault | 30-45 mins | **£60** |
*£60 minimum (first hour). Actual repairs (element replacement) quoted separately.*
---
### Perfect For Your Situation If...
✅ **Water not heating** - immersion on but water cold
✅ **Takes too long** - hours to get lukewarm water
✅ **High bills** - electricity through the roof
✅ **Intermittent** - works sometimes, not others
Why Choose Us for Immersion heater check in Crediton?
Element tested for continuity
Thermostat checked and adjusted
Obvious faults identified
Honest advice on repair vs replace
What to Expect
### Step 1: Basic Checks Verify power is getting to the immersion, check timer is working, make sure it's actually switched on (obvious but often overlooked). ### Step 2: Element Test Use multimeter to test if the element has continuity. Dead element = no heating, simple as that. ### Step 3: Thermostat Check Test thermostat is clicking in and out at the right temperatures. Often it's just set wrong or needs replacing.
Our Crediton Service Coverage
We cover Crediton and a 30-mile radius from Exeter, meaning you get local service with the backing of an established business. Whether you're in the centre of Crediton or in the surrounding villages, we're here to help.
Good to Know
> ⚡ **Dual immersions:** Some cylinders have two elements - one at top (quick heat for small amount), one at bottom (full cylinder). If top works but bottom doesn't, you get hot water for one shower then nothing. **Element replacement:** If element's dead, it's £30-50 for the part plus 1-2 hours labour to drain cylinder, remove old one, fit new, refill, test. Often worth doing if cylinder is otherwise sound. **Exeter's older houses** often have ancient cylinders with equally ancient immersions. If yours is original from the 80s, might be worth considering a whole new cylinder - modern ones are way better insulated and more efficient.
Frequently Asked Questions about Immersion heater check in Crediton
How do I know if my immersion heater is working?
Turn it on for an hour, then run the hot tap. If water isn't noticeably warmer, something's wrong. Could be the element (heats the water), the thermostat (controls temperature), or the wiring.
What can you check without removing the heater?
I can test if it's getting power, check the thermostat trips at the right temperature, and feel if the cylinder is warming up. If the element itself is dead, it needs removing to replace - that's a plumber's job really.
Why is my water only lukewarm?
Thermostat probably set too low or faulty. Easy fix - adjust or replace the thermostat. If it's set high and water's still lukewarm, the element might be partially failed.
How long should it take to heat?
Standard 3kW immersion takes 1-2 hours to fully heat a cylinder from cold. If it's taking 4+ hours or never getting hot, something's not right.
Can you replace it if it's broken?
I can replace thermostats and check wiring. Replacing the actual element means draining the cylinder, unscrewing the old one, fitting new - that's really a plumber's job because you need to seal it properly. I'll advise honestly what's needed.
Get a Free Quote in Crediton
Call us today for a free, no-obligation quote for your immersion heater check job in Crediton.
01392 964094Request Online QuotePricing for Crediton
* Same rates for all locations in our service area
Got multiple jobs?
Make the most of your first hour - I can often tackle several small tasks in one visit. List everything you need done when you call!
Trusted in Crediton
Ready to Book in Crediton?
Get a free quote for your immersion heater check job in Crediton today.