Laminate chip repair in Exeter

Professional laminate chip repair services in Exeter and surrounding areas. Local, reliable handyman - no job too small.

Price Guide

£60

Typical Duration

20-30 mins

Location

Exeter, Devon

Laminate chip filled and colour-matched to blend in. Works on worktops, floors, and furniture - much cheaper than replacing damaged laminate.

That One Chip That Annoys You

Dropped something on the worktop? Furniture scratched the floor? One chipped bit catches your eye every single time you walk past. Get it filled and stop noticing it.

💡 Pro tip: Don't leave chips in worktops near sinks - water gets under the laminate and causes the chipboard underneath to swell. Fix it before it gets worse.


What Makes a Good Repair

The difference between a repair you barely notice and one that looks rubbish is all in the colour match and finish.

✅ Done Right❌ Amateur Job
Colour carefully matched to laminateGeneric "light brown" filler that doesn't match
Filled flush and smoothProud of surface or recessed
Edges blended inHard line between chip and laminate
Protected with sealer on worktopsFiller absorbs water and stains

What You Get

🔧 The Service

StageWhat Happens
MatchFind the right colour for your laminate
FillApply filler to chip, build up if deep
SmoothFinish flush with surface
BlendFeather edges so it's less obvious

📦 You're Left With

  • Chip filled and protected
  • Much less noticeable damage
  • Sealed against moisture (on worktops)
  • Saved cost of replacement

Pricing Guide

ScenarioEstimated TimeYou'll Pay
Single small chip15-20 mins£60
Larger chip or edge damage20-30 mins£60
Multiple chips (same area)30-45 mins£60-£85

Based on £60 minimum (first hour) + £50/hr after. Includes standard colour filler.


Perfect For Your Situation If...

Worktop damage - chip near sink or on edge

Laminate floor - furniture scratched or dented it

Visible chip - catches your eye constantly

Avoid replacement - repair is 10% the cost of new worktop

Why Choose Us for Laminate chip repair in Exeter?

Colour-matched to your laminate

Chip filled and smoothed flush

Much cheaper than replacing

Hardly noticeable when done

What to Expect

Step 1: Colour Match

I'll match the filler to your laminate colour as closely as possible. Solid colours are easiest, wood-effect takes more blending.

Step 2: Fill the Chip

Apply filler, build it up slightly proud of the surface. Better to sand back than have it sink as it dries.

Step 3: Smooth & Finish

Once dry, sand flush and smooth. Blend the edges. On worktops, seal it against moisture.

🔧 DIY Tips

Fancy having a go yourself? Here's how to get decent results:

🔧 What you'll need

  • Laminate repair kit in matching colour (Konig or Liberon are good brands)
  • Fine sandpaper (400 grit)
  • Clean cloth and methylated spirits
  • Putty knife or old credit card
  • Patience - rushing shows

📐 Doing the repair

  1. Clean the chip thoroughly - remove any loose material
  2. Degrease with methylated spirits
  3. Apply filler, slightly overfilled
  4. Let it cure fully (follow kit instructions)
  5. Sand back carefully until flush
  6. If it's not quite flush, add another layer

⚠️ Common DIY mistakes

  • Wrong colour match - test it on a hidden area first
  • Under-filling the chip - it sinks as it dries
  • Sanding before it's fully cured
  • Not cleaning properly before filling
  • Rushing it - each layer needs to cure

💡 Pro trick: For wood-effect laminate, use a fine marker pen to draw in grain lines after filling. Makes it blend much better. Practice on paper first to match the pattern.

Rather leave it to a pro? No problem - that's what I'm here for. Give me a call.

Good to Know

🎨 Multiple chips? Fix them all in one visit. Once I've mixed the colour and got set up, doing extra chips is quick.

Worktop edge really bad? Sometimes a chip repair isn't enough and you need an edge trim fitting instead. I'll advise honestly if that's a better solution.

Textured laminate? Harder to match perfectly because of the texture. Still worth doing but set expectations - it'll look better but won't be invisible.

Frequently Asked Questions

Can you really make laminate chips invisible?

Not completely invisible - it's a repair, not magic. But with proper colour-matching and filling, it'll be much less noticeable than the chip. From across the room you won't see it, up close you'll spot it if you're looking. Way better than living with a big chip.

What types of laminate can you repair?

Kitchen worktops, laminate flooring, furniture, bathroom surfaces - basically anything with a laminate finish that's got chipped. Best results are on flat surfaces, trickier on textured laminates but still doable.

Do I need to buy special repair materials?

I bring colour-matched filler with me - got a range of common colours and can mix to match. For unusual colours, I might ask you to get a specific repair kit, but I'll advise on exactly what to order.

How long does a laminate chip repair take?

Usually 20-30 minutes including drying time. Small chip? 20 mins. Bigger damage or multiple chips takes longer. I'll apply filler, smooth it flush, and blend it in. Then it needs a few hours to cure fully.

Will the repair last or will it chip again?

Depends where it is. A repair on a worktop edge that gets heavy use might chip again eventually - that's just life. But on a less-used area, repairs can last years. Much better than leaving it to get worse.

Get a Free Quote in Exeter

Call us today for a free, no-obligation quote for your laminate chip repair job in Exeter.

01392 964094Request Online Quote

Our Rates

Minimum charge£60
Includes callout + first hour
Additional time£50/hr
This Job£60

Got multiple jobs?

Make the most of your first hour - I can often tackle several small tasks in one visit. List everything you need done when you call!

Why Trust Us

Fully Insured
Local Exeter Business
30 Mile Coverage
No Hidden Costs

Need Laminate chip repair in Exeter?

Get a free quote for your laminate chip repair job in Exeter today.