Plug replacement in Honiton

### Baths Shouldn't Drain While You're In Them

You run a lovely hot bath. Get in. Ten minutes later the **water level's noticeably lower** and you're lying in a **lukewarm puddle**.

The plug's either **too small, perished, or just rubbish**. You've tried pressing it down harder. You've tried the universal rubber one from the supermarket. Nothing seals properly.

So you've either given up on baths or you **top up with hot water every five minutes** like it's the 1950s.

> 💡 **Pro tip:** A proper fitting plug with a fresh rubber seal should hold water for hours. If yours doesn't, the rubber's probably perished or it's the wrong size.

---

### Why Your Plug Won't Seal

| ✅ Proper Plug | ❌ What's Not Working | |----------------|----------------------| | Exact right size for plughole | Too small, sits loose | | Fresh rubber seal | Perished, hard, cracked | | Flat seating surface | Warped or damaged rim | | Slight weight to press down | Too light, floats up |

---

### What I'll Do

**🔧 The Replacement**

| Stage | What Happens | |-------|--------------| | **Measure** | Check exact size of your plughole | | **Clean** | Remove old plug, clean rim properly | | **Fit** | Install new plug with fresh seal |

**📦 You're Left With** - Plug that actually fits - Water stays in the bath - Decent seal that'll last years - No more topping up constantly

---

### Pricing Guide

| Service | Estimated Time | You'll Pay | |---------|----------------|------------| | One plug replacement | 15-20 mins | **£60** | | Multiple (bath + basin) | 20-30 mins | **£60** |

*Based on £60 minimum (first hour). Standard rubber plug about £3-8 if I supply it.*

---

### Common Problems Fixed

✅ **Water drains slowly** - perished seal

✅ **Plug too small** - wrong size, floats around

✅ **Plug won't stay down** - no weight or suction

✅ **Universal plug doesn't fit** - need proper size

✅ **Old plug cracked** - rubber gone hard