Motion sensor garage light in Exeter
Professional motion sensor garage light services in Exeter and surrounding areas. Local, reliable handyman - no job too small.
Price Guide
£60-£85
Typical Duration
1-1.5 hrs
Location
Exeter, Devon
Motion sensor light fitted in your garage. Automatic lighting when you enter - no more fumbling for switches with arms full of shopping or tools.
Stop Fumbling for Light Switches
Walking into a dark garage carrying stuff is annoying - can't find the switch, everything's in shadow. A motion sensor light switches on automatically when you enter. Simple upgrade that makes daily life easier.
💡 Pro tip: Motion sensor lights in garages are brilliant for security too - anything moving in there triggers the light.
Auto Light vs Manual Switch
| ✅ Motion Sensor | ❌ Manual Switch |
|---|---|
| Auto on when you enter | Fumble in the dark |
| Hands-free operation | Arms full, can't reach switch |
| Never left on by mistake | Forget to switch off, wastes power |
| Security benefit | No deterrent to intruders |
What You Get
🔧 The Install
| Stage | What Happens |
|---|---|
| Position | Work out best sensor location |
| Install | Fit light and sensor unit |
| Connect | Wire to mains power |
| Adjust | Set sensitivity and timer |
📦 What's Included
- LED light with PIR sensor
- Wall or ceiling mounting
- Wired to mains power
- Sensitivity and timer adjusted
Pricing Guide
| Setup | Time | You'll Pay |
|---|---|---|
| Single sensor light | 1 hr | £60 |
| Multiple lights | 1.5 hrs | £85 |
Based on £60 minimum (first hour) + £50/hr after. Light unit cost additional.
Perfect For Your Project If...
✅ Dark garage - no windows, needs light
✅ Hands full - carrying shopping or tools
✅ Forget switches - lights left on waste power
✅ Security concern - want intruder deterrent
Why Choose Us for Motion sensor garage light in Exeter?
Automatic light when you enter
Hands-free operation
Energy efficient with LED
Security improvement
What to Expect
Step 1: Plan Position
Work out where sensor should go to cover entry and main garage area. Check power supply access.
Step 2: Install Unit
Mount light and sensor to ceiling or wall. Wire to mains power (might need Part P electrician for new circuits).
Step 3: Adjust Settings
Set detection range, sensitivity, and how long light stays on. Test it triggers properly.
🔧 DIY Tips
Motion sensor lights are straightforward if you're competent with electrics:
🔧 What you need
- LED light with PIR sensor
- Screwdriver and drill
- Wire strippers
- Basic electrical knowledge
- Part P electrician if new circuit
📏 Positioning
- Mount 2-2.5m high for best coverage
- Point at main entrance and working area
- Avoid pointing at heat sources (boilers)
- Test detection range before final fixing
🛠️ Installation
- Switch power off at consumer unit
- Mount light unit to ceiling/wall
- Wire to existing light circuit
- Test before closing up
- Adjust sensitivity and timer
⚠️ Common mistakes
- Positioning where it can't see entrance (triggers late)
- Pointing at garage door (triggers when door moves)
- Not adjusting sensitivity (false triggers or doesn't detect)
- DIY wiring when you should call electrician
💡 Pro trick: Set timer to 2-3 minutes minimum. 30 seconds sounds enough but you'll be constantly triggering it to turn back on. Longer is less annoying.
Rather leave it to a pro? No problem - that's what I'm here for. Give me a call.
Good to Know
🔧 Upgrading garage lighting? Combine motion sensor with brighter LED panels for full garage lighting overhaul.
Part P compliance: New electrical circuits need certification. Adding a light to existing circuit is usually fine for DIY. Check regulations or use qualified electrician.
LED vs halogen: LED is way better - less power, brighter light, lasts years. Halogen bulbs blow regularly and cost more to run.
Dual sensor lights: Some units have daylight sensors too - won't trigger in daytime even if movement detected. Useful if garage has windows.
Battery vs mains: Battery-powered sensor lights exist but need regular battery changes. Mains powered is hassle-free once installed.
Frequently Asked Questions
How does a motion sensor garage light work?
PIR sensor detects movement and switches the light on automatically. Stays on for set time (usually 30 seconds to 5 minutes), then switches off. Means you don't need to fumble for switches in the dark.
Will it work reliably in a garage?
Yes - PIR sensors are designed for this. Position it to cover the door entrance and main working area. Some sensors struggle with temperature changes but quality units handle garage conditions fine.
Can you adjust the sensitivity and time?
Most units have adjustable settings - how sensitive to movement and how long light stays on. I set it up sensibly but you can tweak it yourself after if needed.
What if my garage has no power?
Then you need an electrician to run power first. I can fit battery-powered LED lights with motion sensors, but they need regular battery changes. Mains power is way better.
Will it false-trigger all the time?
Shouldn't if positioned right. Point it at where you walk, not at doors that blow open or areas where animals might pass. Modern PIR sensors are pretty reliable.
Motion sensor garage light Also Available In:
Get a Free Quote in Exeter
Call us today for a free, no-obligation quote for your motion sensor garage light job in Exeter.
01392 964094Request Online QuoteOur Rates
Got multiple jobs?
Make the most of your first hour - I can often tackle several small tasks in one visit. List everything you need done when you call!
Why Trust Us
Need Motion sensor garage light in Exeter?
Get a free quote for your motion sensor garage light job in Exeter today.