Parts washer setup in Exeter
Professional parts washer setup services in Exeter and surrounding areas. Local, reliable handyman - no job too small.
Price Guide
£60-85
Typical Duration
1-1.5 hrs
Location
Exeter, Devon
Parts washer set up safely in your garage. Positioned properly, drainage sorted, ready for cleaning greasy components.
Clean Parts Properly, Work Safely
Trying to rebuild an engine with gunked-up parts is miserable. A parts washer makes cleaning oily components actually work - but only if it's set up properly. Stable position, safe drainage, ventilation sorted.
💡 Pro tip: Position matters with parts washers - they're heavy when full (50+ litres of solvent), contain flammable liquid, and need drainage. Bodge the setup and you'll regret it.
Why Setup Matters
Parts washers go wrong when positioned badly:
| ✅ Proper Setup | ❌ Winged It |
|---|---|
| Stable surface, won't tip | Wobbles, solvent spills |
| Safe drainage solution | Solvent all over garage floor |
| Well ventilated area | Fume buildup, health hazard |
| Away from ignition sources | Fire risk |
What You Get
🔧 The Full Service
| Stage | What Happens |
|---|---|
| Position assessment | Work out best spot in your garage |
| Drainage solution | Sort safe drainage or containment |
| Safety check | Ventilation, stability, fire safety |
📦 You're Left With
- Safely positioned washer
- Drainage sorted properly
- Understand how to use it
- Waste disposal plan explained
Pricing Guide
| Setup Type | Time | You'll Pay |
|---|---|---|
| Basic positioning | 1 hr | £60 |
| Full setup with drainage | 1-1.5 hrs | £60-85 |
Based on £60 minimum (first hour) + £50/hr after. Assumes you've already got the washer - I'm setting it up properly.
Perfect For Your Workshop If...
✅ DIY engine work - rebuild components properly
✅ Motorcycle maintenance - clean bike parts thoroughly
✅ Restoration projects - need serious cleaning capacity
✅ Safety concerned - want it positioned right
Why Choose Us for Parts washer setup in Exeter?
Safe and stable positioning
Drainage solution sorted
Solvent handling advice
Waste disposal guidance
What to Expect
Step 1: Space Assessment
I'll check your garage layout, find the best position that's stable, ventilated, and away from anything that could cause issues.
Step 2: Position & Secure
Washer goes in the right spot on stable surface, positioned for safe drainage and easy use.
Step 3: Drainage & Safety
Sort drainage solution (to drain or collection container), check ventilation, explain safe operation and solvent disposal.
🔧 DIY Tips
Setting up your own parts washer? Here's what matters:
🔧 What you'll need
- Parts washer unit
- Suitable cleaning solvent
- Stable work surface or stand
- Drainage solution or waste containers
- Fire extinguisher nearby (seriously)
📐 Positioning requirements
- Stable, level surface (they're heavy when full)
- Near drainage OR space for waste containers
- Good ventilation (fumes build up)
- Away from heaters, pilot lights, electrics
- Accessible from all sides for filling/emptying
📐 Safe operation setup
- Fill to correct level only (overfill causes spills)
- Use correct grade solvent for your washer type
- Keep lid closed when not in use
- Have spill kit/absorbent material nearby
- Fire extinguisher within reach
⚠️ Common DIY mistakes
- Positioning on unstable surface (tips when full)
- No drainage plan (solvent all over floor)
- Using wrong type of solvent
- Ignoring ventilation (fume buildup)
- Near ignition sources (fire hazard)
💡 Pro trick: Put a drip tray under the whole washer. When (not if) solvent spills or parts drip as you lift them out, it's contained. Saves your garage floor and makes cleanup way easier. Old baking trays work surprisingly well.
Rather leave it to a pro? No problem - that's what I'm here for. Give me a call.
Good to Know
🚗 First time using a parts washer? They're brilliant but treat the solvent with respect - it's flammable and toxic. Work in ventilated areas, keep lids closed, and never smoke near them. Common sense stuff but worth saying.
Solvent types: Most parts washers use either paraffin-based or water-based solvent. Water-based is safer but less effective on heavy grease. I'll explain which yours needs and where to get it locally.
Waste disposal: Used solvent is hazardous waste - can't go down drains or in general waste. Exeter recycling center takes it, or commercial waste services collect. Store in sealed containers with clear labels until disposal.
Frequently Asked Questions
What's a parts washer for?
Cleaning oily/greasy engine components properly before you work on them or refit them. Way better than scrubbing with rags and degreaser - the solvent bath does the work for you. Essential if you're doing serious DIY mechanical work.
Where should a parts washer go in my garage?
Somewhere stable (they're heavy when full), near a drain or with drainage sorted, well-ventilated, and not near ignition sources. They contain flammable solvent so position matters for safety.
Do I need special drainage for it?
Depends on your garage. If you've got a drain, we can work out safe drainage. If not, you'll need to empty it manually into approved containers. I'll help work out the best solution for your space.
What about the used solvent - can I just tip it?
Absolutely not - it's hazardous waste. Needs proper disposal at recycling centers or through commercial waste services. I'll explain safe storage until you can dispose of it properly.
How often does the solvent need changing?
Depends how much you use it, but generally every few months for hobbyist use. When it's black and gunky, it's done. Some washers have filtration to extend solvent life - I can explain how yours works.
Parts washer setup Also Available In:
Get a Free Quote in Exeter
Call us today for a free, no-obligation quote for your parts washer setup job in Exeter.
01392 964094Request Online QuoteOur Rates
Got multiple jobs?
Make the most of your first hour - I can often tackle several small tasks in one visit. List everything you need done when you call!
Why Trust Us
Need Parts washer setup in Exeter?
Get a free quote for your parts washer setup job in Exeter today.