Surfboard rack fitting in Exeter
Professional surfboard rack fitting services in Exeter and surrounding areas. Local, reliable handyman - no job too small.
Price Guide
£60-110
Typical Duration
1-2 hrs
Location
Exeter, Devon
Surfboard storage rack mounted securely to your garage wall. Keeps your boards safe, protected, and out of the way - perfect for Devon's surf community.
Stop Tripping Over Your Surfboards
Boards leaning against the car, fins getting knocked, wax melting all over each other. Every time you open the garage door you're playing Tetris with expensive surfboards.
💡 Pro tip: Proper board storage protects your investment. Wall-mounted racks keep fins safe, prevent pressure dings, and let boards dry properly after sessions.
Why Proper Storage Matters
Devon's surf scene is growing - protect your gear properly:
| ✅ Done Right | ❌ Done Wrong |
|---|---|
| Wall-mounted, fins protected | Leaning against wall, fins getting damaged |
| Boards stored horizontally (less stress) | Standing vertically for months (can warp) |
| Room for multiple boards | One board blocking access to others |
| Securely fixed to solid wall | Falls off when you load a longboard |
What You Get
🔧 The Full Service
I'll mount your surfboard rack securely using heavy-duty fixings appropriate for your wall type, position it at a good height for loading boards, and make sure it'll hold the weight of multiple boards.
📦 You're Left With
- Securely mounted board storage
- Boards protected and organized
- More usable garage space
- Easy access to your quiver
Pricing Guide
| Rack Type | Estimated Time | You'll Pay |
|---|---|---|
| Simple wall hooks (1-2 boards) | 45-60 mins | £60 |
| Standard wall rack (2-4 boards) | 60-90 mins | £60-85 |
| Multi-board system | 90-120 mins | £85-110 |
Based on £60 minimum (first hour) + £50/hr after. Depends on wall type and number of boards.
Perfect For Your Project If...
✅ Growing quiver - multiple boards need proper storage
✅ Protecting investment - modern boards aren't cheap
✅ Limited garage space - wall storage frees up floor
✅ Devon surfer - Croyde, Saunton, Bantham sessions mean wet boards
Why Choose Us for Surfboard rack fitting in Exeter?
Securely mounted to garage wall
Boards stored off floor, protected
Space-saving horizontal or vertical storage
Holds multiple boards safely
What to Expect
Step 1: Position Planning
Work out the best spot - clear of car doors, at a height you can actually lift boards to, with room to slide boards in and out.
Step 2: Secure Mounting
Drill and fix using heavy-duty wall plugs or fixings. Surfboards are heavy and long - the fixings need to be bomber-proof.
Step 3: Load Test
Test with your actual boards. Check the spacing works, padding's positioned right, and you can get boards on and off easily.
🔧 DIY Tips
Surfboard rack fitting is straightforward if you've got the right fixings:
🔧 Tools you'll need
- Drill and appropriate drill bits
- Spirit level (long one ideally)
- Heavy-duty wall plugs
- Screwdriver or impact driver
- Tape measure
- Stud finder (for plasterboard)
📐 Planning position
- Measure your longest board first
- Allow 15-20cm either side for clearance
- Check car door clearance when open
- Height: low enough to lift boards to, high enough fins don't catch
- Leave space between racks for board thickness
✨ Mounting securely
- Use HEAVY-DUTY fixings - boards are surprisingly heavy
- Brick/block walls: minimum 8mm wall plugs, 10mm better
- Find studs on plasterboard walls - hollow fixings aren't strong enough
- Level is critical - wonky racks look terrible and boards slide off
- Test each fixing before mounting the rack
⚠️ Common DIY mistakes
- Inadequate fixings (boards are 10-15kg each)
- Not using a level
- Mounting too high (can't reach to load boards)
- Not checking car door clearance
- Forgetting about fin clearance
💡 Pro trick: Mount racks with a very slight upward tilt (couple of degrees). Helps boards sit back against the wall rather than sliding forward.
Rather leave it to a pro? No problem - that's what I'm here for. Give me a call.
Good to Know
🏄 Devon surf spots - Croyde, Woolacombe, Bantham, Bigbury, Blackpool Sands - we've got great surf in Devon. Proper storage keeps your kit ready for those firing days.
Paddleboards too - SUPs are even heavier than surfboards. Make sure your fixings are rated for the weight.
Rinse after sessions - Saltwater damages boards over time. Rinse them off before storing to protect your gear.
Winter storage - If you're fairweather only, wall storage keeps boards safe and dry through winter.
Frequently Asked Questions
What type of surfboard racks can you fit?
Wall-mounted horizontal racks (boards stored flat), vertical stands (fins up), ceiling-mounted overhead racks - whatever suits your garage and how many boards you've got. Devon surfers usually go for horizontal wall racks.
How many boards will it hold?
Depends on the rack. Basic ones hold 1-2 boards, larger systems can take 4-6 boards or more. If you've got a quiver, we can fit multiple racks along your garage wall.
Will it damage my boards?
Not if fitted properly. Good racks have padded contact points that won't ding your rails. I'll make sure the spacing suits your boards and the padding's in the right places.
Can you mount them to plasterboard walls?
Surfboards are heavy and awkward - they need solid wall fixings. Plasterboard needs studs found and proper fixings. Brick or block walls are much better for board storage.
Do I need to buy the rack first?
Yes - have a look at what's available (Dorsal, Ocean & Earth, or DIY from Screwfix). Bring what you've bought and I'll get it mounted securely.
Surfboard rack fitting Also Available In:
Get a Free Quote in Exeter
Call us today for a free, no-obligation quote for your surfboard rack fitting job in Exeter.
01392 964094Request Online QuoteOur Rates
Got multiple jobs?
Make the most of your first hour - I can often tackle several small tasks in one visit. List everything you need done when you call!
Why Trust Us
Need Surfboard rack fitting in Exeter?
Get a free quote for your surfboard rack fitting job in Exeter today.