Tool board fitting in Exeter
Professional tool board fitting services in Exeter and surrounding areas. Local, reliable handyman - no job too small.
Price Guide
£60-110
Typical Duration
1-2 hrs
Location
Exeter, Devon
Tool board mounted securely to your garage wall. Gets all your tools organized, visible, and easily accessible - proper workshop setup.
Stop Digging Through Toolboxes
Every project starts the same way: 10 minutes digging through toolboxes trying to find the right screwdriver. Tools buried at the bottom, spanners tangled together, that socket set with three sizes missing.
💡 Pro tip: A properly organized tool wall doesn't just save time - it stops you buying duplicates of tools you've already got but can't find.
Why Professional Installation Matters
There's hanging a board, and fitting it properly:
| ✅ Done Right | ❌ Done Wrong |
|---|---|
| Level, professionally mounted | Wonky, looks terrible |
| Securely fixed to wall studs | Falls off wall when loaded |
| Right height for easy access | Too high or too low |
| Properly spaced for ventilation | Tight to wall, can't hang hooks |
What You Get
🔧 The Full Service
I'll mount your tool board securely to the garage wall using appropriate fixings, get it perfectly level, position it at a good working height, and make sure it'll hold the weight of all your tools.
📦 You're Left With
- Professional tool wall installation
- Everything level and secure
- Ready to organize your tools
- Proper workshop setup
Pricing Guide
| Board Size | Estimated Time | You'll Pay |
|---|---|---|
| Small board (4x2ft or similar) | 45-60 mins | £60 |
| Standard sheet (8x4ft) | 60-90 mins | £60-85 |
| Full wall installation | 90-120 mins | £85-110 |
Based on £60 minimum (first hour) + £50/hr after. Depends on size and wall type.
Perfect For Your Project If...
✅ Serious about organization - tired of chaos
✅ Growing tool collection - need proper storage
✅ Workshop setup - doing it properly
✅ Garage reorganization - whole system upgrade
Why Choose Us for Tool board fitting in Exeter?
Securely mounted to garage wall
All tools visible at a glance
Professional, organized workspace
Easy access to everything
What to Expect
Step 1: Position Planning
Work out the best location - within easy reach, good lighting, away from car doors. Mark out level mounting points.
Step 2: Secure Mounting
Fix the board using appropriate wall plugs or fixing into studs. Pegboard needs spacing off the wall (for hooks), French cleats need precise leveling.
Step 3: Load Test
Test it's secure with some actual tools loaded. Check nothing sags, everything's accessible, and you're happy with the height.
🔧 DIY Tips
Tool board fitting is straightforward if you're methodical:
🔧 Tools you'll need
- Drill and appropriate drill bits
- Long spirit level (6ft ideally for large boards)
- Wall plugs or heavy-duty fixings
- Screwdriver or impact driver
- Tape measure
- Stud finder (for plasterboard)
📐 Planning your installation
-
Choose location:
- Good lighting
- Easy access from work area
- Away from car parking spots
- Consider height for comfortable reach
-
Pegboard spacing:
- Needs 1-2cm gap behind for hooks
- Use spacers or battens
- Don't mount flat to wall
-
French cleats:
- Need precise leveling
- Top piece must be perfectly horizontal
- Much stronger than pegboard
✨ Mounting securely
- Find studs on plasterboard walls
- Use heavy-duty fixings rated for loaded weight
- Fix at multiple points across the board
- Level is critical - check it constantly
- Pegboard: fix through some of the holes
- French cleats: level the wall cleat perfectly first
⚠️ Common DIY mistakes
- Not using a level (wonky board drives you mad)
- Inadequate fixings for the weight
- Mounting pegboard flat to wall (hooks won't fit)
- Not checking for cables/pipes before drilling
- Mounting too high (can't reach top tools)
💡 Pro trick: Before drilling anything, lay your most-used tools on the floor in front of the wall. Gives you an idea of how much space you actually need and what height works best.
Rather leave it to a pro? No problem - that's what I'm here for. Give me a call.
Good to Know
🔧 Whole garage reorganization? If you're doing tool boards, consider adding overhead storage, sports racks, and shelving at the same time. I can fit a complete garage storage system in one visit.
Pegboard vs French cleats - Pegboard's cheap and flexible, great for light tools. French cleats are more expensive but far stronger - better for heavy tools and power tools.
Lighting matters - A tool wall needs good lighting. Consider adding an LED strip above it if the garage lighting's poor.
Paint it first - Much easier to paint the pegboard before mounting it. White or bright colors make tools easier to see.
Tool outlines - Some people draw outlines of tools on the board. Looks professional and you know instantly if something's missing.
Frequently Asked Questions
What type of tool board can you fit?
Pegboard, slatwall, French cleat systems, magnetic tool boards - whatever suits your tools and garage. Pegboard's most popular because it's cheap and flexible, but French cleats are better for heavy tools.
Do I need to buy the board first?
Yes - there are loads of different systems. Pegboard from B&Q is cheap and works well. French cleat systems from Screwfix are brilliant but more expensive. Get what suits your budget and I'll fit it properly.
How big a board can you fit?
As big as your wall space allows. Single 8x4 sheet, whole wall, multiple boards - whatever you want. I'll make sure it's mounted securely and level.
Can you mount it to plasterboard walls?
Heavy tools need solid fixing. On plasterboard I'll either find the studs and fix to those, or use heavy-duty plasterboard fixings rated for the weight. Masonry walls are much better though.
Will you arrange my tools on it?
I'll mount the board and make sure it's level and secure. How you arrange your tools is up to you - you know what you use most often. If you want suggestions on layout, I'm happy to advise.
Tool board fitting Also Available In:
Get a Free Quote in Exeter
Call us today for a free, no-obligation quote for your tool board fitting job in Exeter.
01392 964094Request Online QuoteOur Rates
Got multiple jobs?
Make the most of your first hour - I can often tackle several small tasks in one visit. List everything you need done when you call!
Why Trust Us
Need Tool board fitting in Exeter?
Get a free quote for your tool board fitting job in Exeter today.