Trailer coupling greasing in Crediton
Looking for professional trailer coupling greasing help in Crediton? Hembury Contracting provides reliable vehicle services across Crediton and surrounding areas.
Price Guide
£60
Typical Duration
10-15 mins
Location
Crediton
Trailer coupling cleaned and properly greased for smooth, quiet towing. Reduces wear, prevents rust, stops that annoying squeaking noise.
### Stop That Squeaking
Hook up your trailer and every corner sounds like you're **dragging a bag of spanners down the road**. That grinding, squeaking noise that makes everyone look at you.
> 💡 **Pro tip:** A properly greased coupling is quieter, wears less, and actually improves fuel economy slightly by reducing friction.
---
### Why Proper Greasing Matters
More than just stopping the noise:
| ✅ Greased Properly | ❌ Dry/Neglected | |--------------------|------------------| | Quiet, smooth operation | Squeaking driving you mad | | Ball protected from rust | Rusty ball wearing coupling | | Coupling wears evenly | Grooves wearing in ball | | Easy to couple up | Stiff, difficult connection |
---
### What You Get
**🔧 The Full Service**
I'll clean the tow ball thoroughly, apply proper trailer coupling grease, make sure the coupling mechanism moves freely, and wipe off any excess.
**📦 You're Left With** - Properly greased coupling - Quiet towing - Protected from rust - Smooth operation
---
### Pricing Guide
| What's Involved | Estimated Time | You'll Pay | |-----------------|----------------|------------| | Coupling greasing | 10-15 mins | **£60** |
*£60 minimum charge. Quick 10-minute job but that's the callout fee.*
---
### Perfect For Your Project If...
✅ **Squeaking coupling** - driving you mad
✅ **Rusty tow ball** - needs cleaning and protecting
✅ **Forgotten to grease** - about to tow
✅ **Part of pre-trip check** - caravan trip prep
Why Choose Us for Trailer coupling greasing in Crediton?
Coupling properly greased
Quieter towing
Reduced wear and friction
Quick 10-minute service
What to Expect
### Step 1: Clean Ball Wire brush the tow ball to remove old grease, dirt, and rust. Clean surface is critical for proper greasing. ### Step 2: Apply Grease Apply proper trailer coupling grease to the ball - not too much, not too little. Focus on the contact area where coupling sits. ### Step 3: Wipe Excess Remove any excess grease that'll just fling off when you're driving. You want a thin, even coating.
Our Crediton Service Coverage
We cover Crediton and a 30-mile radius from Exeter, meaning you get local service with the backing of an established business. Whether you're in the centre of Crediton or in the surrounding villages, we're here to help.
Good to Know
> 🚗 **IMPORTANT:** If you have a stabilizer hitch (AL-KO, BPW, etc.), DO NOT grease the ball. They specifically require a clean, dry ball for the friction pads to work. Check your hitch type before greasing. **Before every trip** - Greasing the coupling is part of pre-trip checks. Takes 2 minutes, prevents wear, stops annoying noises. **Minimum charge applies** - This is genuinely a 10-minute DIY job. Only makes sense to book if I'm already at yours doing other towing prep work. **Check ball wear** - While you're greasing, check the ball for grooves or wear. Worn balls need replacing (MOT fail and dangerous). **Devon caravanning** - Loads of great caravan sites in Devon. Proper coupling maintenance makes the journey there much more pleasant.
Frequently Asked Questions about Trailer coupling greasing in Crediton
Why would I pay someone to grease a trailer coupling?
You probably wouldn't - it's dead simple. Wipe the ball clean, apply grease, couple up. But if you're about to tow and forgot to grease it, or you're getting other towing work done, I can sort it quickly.
What type of grease do you use?
Proper trailer coupling grease - designed specifically for ball hitches. Not WD-40, not general purpose grease. The proper stuff stays put under load and doesn't wash off easily.
How often should I grease the coupling?
Before every tow ideally, or at minimum every few months if you tow regularly. Signs you need grease: squeaking/grinding noises when turning, visible rust on ball, coupling feels stiff.
Do I need to grease stabilizer hitches?
NO - stabilizer hitches (like AL-KO or BPW) specifically say NOT to grease the ball. They rely on friction pads and grease stops them working. Regular hitches need grease, stabilizers don't.
Can I just use any grease?
You can, but trailer coupling grease works better - it's designed to stay put under the high loads and movement of towing. WD-40 or general grease washes off quickly.
Get a Free Quote in Crediton
Call us today for a free, no-obligation quote for your trailer coupling greasing job in Crediton.
01392 964094Request Online QuotePricing for Crediton
* Same rates for all locations in our service area
Got multiple jobs?
Make the most of your first hour - I can often tackle several small tasks in one visit. List everything you need done when you call!
Trusted in Crediton
Ready to Book in Crediton?
Get a free quote for your trailer coupling greasing job in Crediton today.