Tyre tread check in Exeter

Professional tyre tread check services in Exeter and surrounding areas. Local, reliable handyman - no job too small.

Price Guide

£60

Typical Duration

20-30 mins

Location

Exeter, Devon

Professional tyre tread measurement with a proper gauge. All four tyres checked for legal depth, uneven wear patterns identified, replacement timeline advised.

Are Your Tyres Actually Legal?

Most people have no idea. The tread looks fine to the eye - there's still pattern visible - but measured properly it's borderline illegal or well past it.

The legal limit is 1.6mm. Police and MOT testers measure it accurately. "Looks okay" doesn't cut it when you're stopped or fail your MOT.

Worse, tyres below 3mm are dangerous in the wet even if they're technically legal. Stopping distances increase massively. Hydroplaning risk shoots up.

I measure all four tyres properly with a depth gauge. You'll know exactly where you stand - legal, marginal, or time to replace.

💡 Pro tip: The 20p test is handy for a rough check - if you can see the outer band when inserted in the tread, you're below 1.6mm. But get them measured properly for accuracy.


Why Accurate Measurement Matters

Guessing gets expensive:

✅ Measured Properly❌ Guessed
Know exact remaining treadThink they're fine, actually illegal
Plan replacement timingLast-minute panic, expensive
Spot uneven wear earlyTracking issues ruin new tyres too
Confident for MOTFailed MOT, retest fees

What You Get

🔧 Full Tread Inspection

CheckWhat I Measure
Tread depthAccurate gauge on all four tyres
Legal statusAbove or below 1.6mm limit
Wear patternsEven wear or concerning patterns
Across tyreInner, center, outer edges
All aroundFull circumference checked

📦 You're Left With

  • Written record of measurements
  • Legal status confirmed
  • Replacement advice if needed
  • Estimated remaining life

Pricing Guide

ServiceEstimated TimeYou'll Pay
All four tyres tread depth check20-30 mins£60

Based on £60 minimum (first hour). Measuring and inspection only - new tyres not included.


Perfect For Your Situation If...

MOT coming up - check they'll pass first

Not sure if legal - get accurate measurement

Planning long trip - confirm they're safe

Just bought the car - verify tyre condition

Why Choose Us for Tyre tread check in Exeter?

Know your tyres are legal

Accurate tread depth measurements

Spot uneven wear early

Advice on replacement timing

What to Expect

Step 1: Measure All Tyres

Proper tread depth gauge on all four tyres. Inner edge, center, outer edge. Check all the way around, not just one spot.

Step 2: Assess Wear Patterns

Look at how they're wearing. Even across the tyre? One edge more than the other? Tells me about pressures, tracking, suspension issues.

Step 3: Advise & Explain

Tell you what I found - which tyres are fine, which are getting close, which need replacing now. If there's uneven wear, I'll explain why and what needs fixing.

🔧 DIY Tips

Want to check your own tyre tread? Here's how:

🔧 Tools you'll need

  • Tread depth gauge (£5-10, worth having)
  • 20p coin for quick check
  • Good light
  • Notepad to record measurements

🔍 The proper method

  1. Check in multiple places around each tyre
  2. Measure inner edge, center, outer edge
  3. Note the shallowest reading (that's what matters)
  4. Look for uneven wear patterns
  5. Record which tyre, which position, what depth

💡 Understanding tread depth

  • New tyres: 7-8mm typically
  • Replace soon: Below 3mm (especially for wet weather safety)
  • Legal minimum: 1.6mm (but not safe minimum)
  • MOT fail: Anything below 1.6mm anywhere on the tyre

⚠️ Common DIY mistakes

  • Only checking one spot on each tyre
  • Not checking inner edge (often wears faster)
  • Assuming all four tyres wear the same
  • Waiting until legal limit (3mm is safer replacement point)
  • Using only the 20p test without accurate gauge

💡 Pro trick: Check tread depth after tracking work or getting new tyres fitted. It gives you a baseline measurement to compare against later. If one tyre is wearing much faster than the others, you know something's wrong before it ruins all four.

Rather leave it to a pro? No problem - that's what I'm here for. Give me a call.

Good to Know

🚗 MOT in a month? Get tread checked now. If you're marginal, you have time to shop around for tyres instead of paying whatever the MOT station charges.

Front tyres wearing faster? Normal on front-wheel-drive cars - they do all the work. Rotate front to back if they're same size to even out wear.

Bought a car with "good tyres"? Get them measured. "Good" is subjective - might be legal but close to the limit. Know what you're starting with.

Frequently Asked Questions

What's the legal minimum tread depth?

1.6mm across the central three-quarters of the tyre, around the whole circumference. But that's a legal minimum, not safe minimum - tyres perform noticeably worse once they get below 3mm, especially in wet conditions. I measure accurately and tell you where you stand.

Do you check all four tyres?

Yes - all four corners get measured properly with a depth gauge. Front tyres often wear faster than rears on front-wheel-drive cars. I check them all and tell you which need attention soonest.

What if one tyre is wearing unevenly?

Uneven wear tells a story - usually tracking issues, incorrect pressures, or suspension problems. I'll show you the pattern and explain what's causing it. Sometimes a simple tracking adjustment saves premature tyre replacement.

How long before MOT should I check tread?

At least a few weeks before, so there's time to get new tyres fitted if needed without rushing. Last-minute discoveries mean you're forced to take whatever's available or pay premium prices. Plan ahead.

Can you tell me how much life is left in my tyres?

I can give you a realistic estimate based on current depth and your typical mileage. If you've got 4mm and do 10,000 miles a year, I can work out roughly how long before they hit the legal limit or safe replacement point.

Get a Free Quote in Exeter

Call us today for a free, no-obligation quote for your tyre tread check job in Exeter.

01392 964094Request Online Quote

Our Rates

Minimum charge£60
Includes callout + first hour
Additional time£50/hr
This Job£60

Got multiple jobs?

Make the most of your first hour - I can often tackle several small tasks in one visit. List everything you need done when you call!

Why Trust Us

Fully Insured
Local Exeter Business
30 Mile Coverage
No Hidden Costs

Need Tyre tread check in Exeter?

Get a free quote for your tyre tread check job in Exeter today.