Bedside table assembly in Exeter
Professional bedside table assembly services in Exeter and surrounding areas. Local, reliable handyman - no job too small.
Price Guide
£60
Typical Duration
30-45 mins
Location
Exeter, Devon
Professional bedside table assembly - nightstands and bedside cabinets built with drawers that actually glide. Perfect for matching pairs positioned symmetrically.
Drawers That Actually Work
Bedside tables seem simple until you're staring at a pile of panels and instructions that assume you've got three hands. Drawers are the usual pain point - get them slightly wrong and they'll stick, jam, or never quite close flush.
💡 Smart booking tip: A pair of bedside tables takes 30-45 minutes. Combine with bed frame assembly or other small jobs to get the best value from your first hour.
Why Drawers Go Wrong
| ✅ Done Right | ❌ Common Problems |
|---|---|
| Runners precisely aligned | Drawer catches and sticks |
| Base panel properly seated | Drawer sags and jams |
| Front panel square | Never closes flush |
| Soft-close adjusted | Slams shut or won't close |
I take the time to get these right. Your drawers will glide smoothly for years.
What You Get
🔧 Full Assembly
| Stage | What Happens |
|---|---|
| Parts check | Inventory and hardware check |
| Build | Carcase assembled square and solid |
| Drawers | Runners precisely aligned |
| Finish | Levelled and positioned |
📦 Combine Jobs for Value
Since you're paying for the first hour anyway:
- Bed frame assembly (obvious pairing)
- Lamp setup (touch lamps, awkward switches)
- Small shelf mounting
- Handle/knob replacement
- Cable management
Pricing Guide
| Job | Estimated Time | You'll Pay |
|---|---|---|
| Single bedside table | 20-30 mins | £60 |
| Pair of bedside tables | 45 mins | £60 |
| Pair + bed frame | 2-2.5 hrs | £110-£135 |
Based on £60 minimum (first hour) + £50/hr after.
Perfect For...
✅ New bedroom furniture - Tables and bed together
✅ Matching pairs - Positioned symmetrically
✅ IKEA nightstands - MALM, HEMNES, any model
✅ Drawer problems - Fix sticking drawers
Why Choose Us for Bedside table assembly in Exeter?
Drawers aligned so they glide and close properly
Legs levelled for uneven floors
Matching pairs positioned symmetrically
Perfect add-on to bed frame assembly
What to Expect
Step 1: Parts Check
Inventory all components, confirm final positioning in bedroom.
Step 2: Assembly
Carcase built square, drawer runners precisely aligned, hardware tightened properly.
Step 3: Position
Drawer operation tested, unit levelled on floor, positioned exactly where you want it.
🔧 DIY Tips
Fancy building them yourself? Here's how to avoid sticky drawers:
🔧 Tools you'll need
- Phillips screwdriver
- Allen keys (usually supplied)
- Rubber mallet
- Spirit level
📐 The drawer secret
- Build the carcase loosely first
- Check it's square before tightening (measure diagonals)
- Install runners at exactly the same height both sides
- Attach drawer base before fitting front panel
- Adjust soft-close mechanism last
⚠️ Common mistakes
- Tightening carcase before checking square
- Runner heights not matching (drawer tilts)
- Forgetting the base panel groove
- Over-tightening cam locks
💡 Pro trick: Use a spirit level across both runners before fitting the drawer. If they're not perfectly level with each other, the drawer will always catch. Small adjustments at this stage save big frustrations later.
Rather leave it to a pro? No problem - that's what I'm here for. Give me a call.
Good to Know
🛏️ Think about plug sockets - Position tables where you can easily reach power for phone charging and bedside lamps.
Positioning tips:
- Both tables at equal distance from bed
- Leave clearance for drawers to open fully
- Consider lamp cable routing
Matching pairs:
- Check both are same height (floor may not be level)
- Align fronts, not backs
- Same drawer direction (handles facing bed)
Frequently Asked Questions
Can you assemble a pair of matching bedside tables?
Yes, and this is the most common request. A pair takes around 45 minutes total. Add it to bed frame assembly and you're making excellent use of the booking.
My drawers always stick - can you fix that?
Usually, yes. Drawer problems almost always come down to assembly - runners not aligned, base panels not seated, or unit slightly out of square. I'll make sure everything is positioned correctly so drawers glide smoothly.
Is this job big enough to book on its own?
You can, but I'd suggest combining with other small jobs. At 30-45 minutes for a pair, you're paying for the first hour anyway, so add in other items like lamp assembly, small shelf mounting, or furniture repairs.
Do bedside tables need wall fixing?
Not usually - they're designed to be freestanding. However, if you have small children and the unit is tall, an anti-tip bracket might be worth considering.
Bedside table assembly Also Available In:
Get a Free Quote in Exeter
Call us today for a free, no-obligation quote for your bedside table assembly job in Exeter.
01392 964094Request Online QuoteOur Rates
Got multiple jobs?
Make the most of your first hour - I can often tackle several small tasks in one visit. List everything you need done when you call!
Why Trust Us
Need Bedside table assembly in Exeter?
Get a free quote for your bedside table assembly job in Exeter today.