Multi gym assembly in Exeter
Professional multi gym assembly services in Exeter and surrounding areas. Local, reliable handyman - no job too small.
Price Guide
Quote
Typical Duration
Half day+
Location
Exeter, Devon
Professional multi-gym assembly - all stations working correctly, cables properly routed and tensioned, weight stack installed safely. Tested thoroughly before handover. Ready for safe, effective training.
This Isn't Flatpack Furniture
Multi-gyms promise the complete home gym - lat pulldowns, chest press, leg extensions, cable crossovers. But they arrive with 300+ parts, complex cable routing, and instruction manuals that assume engineering knowledge.
⚠️ Safety critical. This is equipment you'll be under when loaded. Failed cables drop weight. Poorly tensioned pulleys bind. Getting it right is essential.
Why Multi-Gyms Are Serious
| ✅ Done Right | ❌ Common Problems |
|---|---|
| Cables routed correctly | Binding and wear |
| Weight stack secure | Selector fails |
| Frame stable | Movement during use |
| All stations tested | Discover problems later |
What You Get
🔧 Full Assembly
| Stage | What Happens |
|---|---|
| Frame | Main structure squared |
| Cables | Routed through pulleys |
| Weights | Stack installed safely |
| Attachments | Bars, handles fitted |
| Safety | All catches checked |
| Test | Every station loaded |
📦 Brands I Work With
- Marcy
- Body-Solid
- Bodymax
- Inspire
- Bowflex
- All major brands
Pricing
Multi-gym assembly is quote-based. Factors include:
- Equipment complexity (single vs dual stack)
- Number of stations
- Additional features (smith machine, crossover)
- Time required
Half-day minimum based on £60 minimum (first hour) + £50/hr after.
Perfect For...
✅ Single stack multi-gyms - Most common home type
✅ Dual stack - Two independent weight stacks
✅ Smith machine combos - Additional complexity
✅ Cable crossovers - Wide frame setups
Why Choose Us for Multi gym assembly in Exeter?
All exercise stations working correctly
Cables routed properly and tensioned for smooth operation
Safety pins and adjustments demonstrated
Stable on your floor, ready for safe training
What to Expect
Step 1: Room Prep
Room cleared, ceiling height verified, all boxes present, parts inventoried against manual.
Step 2: Assembly (Half day+)
Frame construction, cable routing, weight stack installation, attachments fitted, comprehensive testing.
Step 3: Handover
Every station demonstrated, adjustments explained, safety features shown, lubrication points noted.
🔧 DIY Tips
Building it yourself? Here's what matters:
🔧 Tools you'll need
- Socket set (multiple sizes)
- Allen keys
- Phillips screwdriver
- Silicone lubricant
- Step ladder
📐 Key steps
- Clear large floor space
- Build frame first, check stable
- Route cables carefully - no twists
- Install weight stack with care
- Test every station before use
⚠️ Common mistakes
- Twisted cable runs (causes wear)
- Overtightening pulley brackets
- Skipping weight stack lubrication
- Not testing under load
💡 Pro trick: Before installing cables, photo the routing diagram and keep it visible. Cable paths look similar but aren't - wrong routing causes binding and rapid wear. Take your time with this step.
Rather leave it to a pro? No problem - that's what I'm here for. Give me a call.
Good to Know
📏 Don't underestimate space needed - multi-gyms look smaller in showrooms. Measure carefully and add clearance for safe use. Check ceiling height for lat pulldowns.
Floor protection:
- Rubber mats protect flooring
- Reduce noise transmission
- Provide stable footing
Maintenance:
- Monthly lubrication of guide rods
- Check cable wear regularly
- Tighten bolts after first month
- Replace worn cables before failure
Frequently Asked Questions
Why do multi-gyms need professional assembly?
300+ parts, multiple cable runs, weight stack installation, and critical safety components. This is equipment you'll be under when loaded - getting it right isn't optional.
How long does it take?
Half a day minimum for standard units. Complex multi-gyms with cable crossovers take a full day. Send me the model for accurate estimate.
Will you test everything?
Absolutely. Every station gets tested with weight loaded. Cable tracking, pulleys, weight stack pins, safety stops - all checked and demonstrated.
Can you move my old equipment out?
I can disassemble old equipment if needed. Moving heavy assembled gym equipment is difficult - we can discuss when quoting.
Multi gym assembly Also Available In:
Get a Free Quote in Exeter
Call us today for a free, no-obligation quote for your multi gym assembly job in Exeter.
01392 964094Request Online QuoteOur Rates
Got multiple jobs?
Make the most of your first hour - I can often tackle several small tasks in one visit. List everything you need done when you call!
Why Trust Us
Need Multi gym assembly in Exeter?
Get a free quote for your multi gym assembly job in Exeter today.