Lever tap fitting in Exeter
Professional lever tap fitting services in Exeter and surrounding areas. Local, reliable handyman - no job too small.
Price Guide
£60
Typical Duration
45-60 mins
Location
Exeter, Devon
Professional lever tap fitting for Devon homes - easy-to-operate lever taps for those with weak grip or arthritic hands.
Taps You Can Actually Turn
Round tap handles need grip strength. Lever taps just need a push. Use your wrist, elbow, or forearm.
💡 Pro tip: Single lever mixer taps are easiest - one lever does everything. Push up for on, left/right for temperature.
Lever Taps vs Round Knobs
| ✅ Lever Taps | ❌ Round Knobs |
|---|---|
| Push or pull | Grip and twist |
| Wrist operation | Finger strength |
| Easy control | Hard to grip |
| Works wet | Slippery when wet |
Lever Options
| Type | Best For |
|---|---|
| Single mixer | Easiest operation |
| Separate hot/cold | Traditional look |
| Long lever | Maximum leverage |
| Quarter turn | Quick on/off |
| Sensor | No touch needed |
What You Get
🔧 The Full Service
| Stage | What Happens |
|---|---|
| Isolate | Turn off water |
| Remove | Take off old taps |
| Fit | Install lever taps |
| Check | Test for leaks |
📦 You're Left With
- Lever taps fitted
- Easy operation
- No leaks
- Full control
Pricing Guide
| Scope | Estimated Time | You'll Pay |
|---|---|---|
| Lever tap fitting | 45-60 mins | £60 |
£60 minimum. Taps extra if we supply.
Perfect For Your Project If...
✅ Weak grip - Can't twist knobs
✅ Arthritis - Hands hurt
✅ Wet hands - Taps slip
✅ Prevention - Before it gets harder
Why Choose Us for Lever tap fitting in Exeter?
Easy to operate
No grip needed
Use wrist or elbow
Precise control
What to Expect
Step 1: Isolate
Turn off water supply.
Step 2: Remove
Take off old taps.
Step 3: Fit
Install new lever taps.
🔧 DIY Tips
Fitting lever taps yourself? Here's what matters:
🔧 What you'll need
- Lever taps (right size)
- Adjustable spanner
- PTFE tape
- Towels for drips
📐 Fitting tips
- Turn off water at stopcock
- Open taps to drain
- Disconnect old taps
- Clean surfaces
- Fit new taps with seals
⚠️ Important points
- Water off first
- Check for leaks
- Tighten carefully
- Test hot and cold
💡 Pro tip: Run both taps for a minute after fitting. Check under sink for any drips before calling it done.
Rather leave it to a pro? No problem - that's what I'm here for. Give me a call.
Good to Know
🚰 Independence at the sink - lever taps mean you can wash hands, fill kettles, and use water without struggling. Daily independence.
Combine with:
- Tap turner fitting
- Kitchen reorganisation
- Easy grip handles
Related services:
- Tap turner supply
- Plumbing adaptations
- General elderly help
Frequently Asked Questions
What are lever taps?
Taps with long lever handles instead of round twist knobs. Push or pull the lever to turn water on and off. Can be operated with weak hands, wrists, or even elbows.
Do you fit new taps or convert existing ones?
We can fit new lever taps or sometimes fit lever handles to existing taps. Depends on your current setup - we'll advise.
What about mixer taps?
Single lever mixer taps are easiest to use - one lever controls temperature and flow. We can fit these in kitchen or bathroom.
Is it plumbing work?
Tap replacement is straightforward plumbing. We isolate water, swap taps, check for leaks. No major disruption.
Lever tap fitting Also Available In:
Get a Free Quote in Exeter
Call us today for a free, no-obligation quote for your lever tap fitting job in Exeter.
01392 964094Request Online QuoteOur Rates
Got multiple jobs?
Make the most of your first hour - I can often tackle several small tasks in one visit. List everything you need done when you call!
Why Trust Us
Need Lever tap fitting in Exeter?
Get a free quote for your lever tap fitting job in Exeter today.