Plumbing in Newton Abbot

Toilet cistern constantly filling? That's a failed ball valve. I'll replace it with a modern quiet-fill valve - stop the waste, stop the noise, stop the high water bills.

Professional basin installation with proper connections and clean pipework. I fit your new basin securely, connect everything leak-free, and leave your bathroom tidy and working perfectly.

Bath panels fitted neatly to give your bathroom a proper finish. I measure, cut, and fit panels securely while keeping access for future plumbing work.

Bath seals stripped out and replaced properly with anti-mould silicone. I remove all the old sealant, clean the surfaces, and apply a fresh waterproof bead that'll last for years.

Complete bathroom sealant renewal - every seal stripped out and replaced with fresh anti-mould silicone. Makes a tired bathroom feel fresh again without the cost of a full refurb.

Bathroom basin taps replaced with modern fixtures that work smoothly and don't leak. I remove your old taps, fit the new ones properly, and connect everything leak-free.

Bidets installed properly with hot and cold water supplies and waste drainage. I position it securely, run all the pipework, and leave everything tested and working perfectly.

Bidet toilet seats fitted to your existing toilet. I remove the old seat, connect the water supply, mount the bidet seat, and test everything works properly.

Blocked outside drains cleared to get water flowing again. I locate the blockage, clear it properly, flush the system, and leave your drains working as they should.

Sink not draining? Water backing up? I'll clear the blockage quickly - usually it's just gunk in the trap or waste pipe. Quick fix, proper drainage restored.

Toilet blocked and won't flush? I'll clear it quickly - proper tools, no mess, back to working order. Most blockages cleared in under an hour.

Burst pipe repairs done fast to stop water damage. I stop the leak, repair or replace the damaged section properly, and get your water back on as quickly as possible.

Toilet constantly running? Won't flush properly? I'll repair your cistern mechanism quickly - usually just worn parts that need replacing. Stop the water waste, get a proper flush again.

Cold water storage tanks replaced in your loft. I remove the old tank safely, fit the new one with proper support and insulation, reconnect all pipework, and test the system thoroughly.

Dishwashers safely disconnected ready for removal. I turn off the water, disconnect supply and waste, and leave everything capped off ready for your new machine or removal.

New dishwashers installed and tested working. I connect water supply with isolation valve, fit waste hose properly, level the machine, and test everything before you run your first load.

Stubborn drain blockages cleared with proper drain rodding. I rod through the full run to break up the blockage, flush the system, and leave your drains flowing freely.

Dripping taps fixed properly to stop the leak. I replace worn washers or cartridges, check the valve seat, and leave your tap operating smoothly with no drip.

Broken float valves replaced to stop running toilets and overflowing cisterns. I fit modern reliable valves, adjust the water level correctly, and test everything works properly.

Loft header tanks inspected thoroughly to spot problems before they cause damage. I check tank condition, ballcock operation, overflow, insulation, and support - then give you honest advice on what (if anything) needs doing.

Isolation valves fitted to taps, toilets, and appliances so you can turn water off locally for servicing. Makes future repairs much easier without shutting off the whole house supply.

Kitchen taps replaced with new modern mixers or traditional pillar taps. I remove your old taps, fit new ones with proper seals, connect to your water supply, and test everything leak-free.

Leaking pipes repaired properly to stop water damage. I locate the leak, fix it permanently (not temporary patch), and leave you with reliable plumbing that won't leak again.

Mixer tap dripping, leaking, or temperature control playing up? I'll diagnose the problem and get it sorted - usually same visit.

I'll fit an outside tap to your external wall - proper connection to your cold supply, double check valve fitted, inside isolation for winter. Never haul the hosepipe through the house again.

Outside tap leaking, dripping, or broken from frost damage? I'll get it fixed or replaced - usually sorted same visit.

Overflow pipe dripping outside? That's water (and money) running away constantly. I'll find which tank is overfilling and fix it - usually a simple ball valve job.

P-trap under your sink leaking? I'll whip out the old one and fit a new trap - simple job, usually done in 30 minutes.

Fitting a traditional pedestal sink - basin fixed to wall, pedestal supporting it, everything plumbed in properly and sealed tight.

Radiators cold at the top? That's trapped air. I'll bleed them properly, get your heating working efficiently again - no more cold spots, lower energy bills.

Radiator pulled away from the wall? Wonky or loose? I'll refit it properly - secure brackets in solid wall, level fitting, tested for leaks. Job done in under an hour.

Decorating? I'll remove your radiators so you can paint behind them properly, then refit them when you're done. One price for the whole service - off, decorate, back on.

Old radiator not heating properly? I'll swap it for a new efficient model - better heat output, lower running costs. Fitted to existing pipework, no mess, tested thoroughly.

Radiator valve leaking or seized? I'll replace it with a modern thermostatic valve - stop the leak, get proper temperature control, system tested and balanced.

Old shower head looking tired? I'll swap it for a new one in under 30 minutes. Simple upgrade, instant improvement - no mess, no fuss.

Shower hose leaking or kinked? I'll swap it out for a new one - usually takes about 15 minutes, job done.

Fitting an adjustable shower rail - everyone in the house can set the shower head to their height. Fixed securely to the wall, slides smoothly.

Fitting shower screens properly - level, plumb, sealed watertight, tested before I leave. No more water all over your bathroom floor.

Cracked or leaking shower tray? I'll replace it properly - level fitting, waste connected correctly, sealed watertight. Stop the leak before it causes serious damage.

Grotty old silicone sealant? I'll strip it all out properly and apply fresh bathroom-grade silicone. Clean, watertight seals that'll last years, not months.

Installing kitchen sinks and bathroom basins - fitted securely, all plumbing connected properly, sealed watertight. Old sink removed if needed.

Stopcock seized, leaking, or won't turn? I'll free it up if possible, or replace it with a new valve - job done same visit usually.

Replacing old taps with new ones - remove old, fit new, connect everything properly, test for leaks. Kitchen taps, bathroom taps, all done same visit usually.

Dripping tap doing your head in? I'll replace the washer in 30 minutes. Proper fix, not a bodge - you'll actually get a good night's sleep again.

Toilet playing up? Running constantly, weak flush, or leaking? I'll diagnose and fix it properly - usually just worn internal parts that need replacing.

Full toilet replacement - remove old WC, fit new pan and cistern, connect waste and supply, seal to floor, test everything. Sorted same day.

Toilet seat broken or loose? I'll whip off the old one and fit your new seat properly - job done in about 15 minutes.

I'll fit a heated towel rail to your central heating - warm towels every day, extra heat for the bathroom. Properly connected, bled, and tested.

Installing bathroom vanity units - assemble if needed, fit basin, plumb in taps and waste, secure to wall, seal edges. Complete bathroom storage solution.

Disconnecting washing machines properly - turn off water, disconnect hoses, cap connections, ready to move. Quick 15-20 minute job usually.

Installing washing machines - connect hot and cold supply, fit waste hose, level properly, test it works. Straightforward job, done right.

Waste pipe leaking or blocked? I'll find the problem, clear blockages, replace damaged sections, get your drainage flowing properly again.

Leaking waste pipe under the sink? Dodgy drainage? I'll replace the damaged section with new plastic pipework - proper seals, correct falls, no more leaks or smells.

I'll fit an under-sink water filter to your kitchen - connected to existing or new tap, tucked away out of sight. Cleaner, better-tasting water on tap.

Can't access your water meter? Cover stuck, buried, or broken? I'll sort it out quickly - clear the chamber, fix or replace the cover, make readings easy.

Water pressure problems need proper diagnosis - I test systematically to find the exact cause, then advise on solutions. Fix simple issues same visit.

Installing water softeners - plumb into mains supply, fit bypass valve, connect waste, set up and program system. Complete installation, tested and working.