Compressor setup in Exeter
Professional compressor setup services in Exeter and surrounding areas. Local, reliable handyman - no job too small.
Price Guide
£60-£85
Typical Duration
45-60 mins
Location
Exeter, Devon
Air compressor positioned and set up ready for use. I'll handle placement, electrical connection, testing, and show you how to maintain it properly.
From Box to Working Tool
Bought a compressor for the workshop and now it's sitting in the corner still in the box? They're heavy, awkward, and need proper positioning. Plus you need to know where it can go, whether your electrics can handle it, and how to actually use the thing safely.
💡 Pro tip: Wrong positioning causes vibration noise that travels through the floor. Good positioning keeps it quiet and makes maintenance easier.
Setup Done Properly
| ✅ Done Right | ❌ Done Wrong |
|---|---|
| Positioned on solid floor, vibration dampened | Sitting on hollow floor, rattles whole house |
| Adequate ventilation all around | Tucked in corner, overheats in summer |
| Drain valve accessible for regular maintenance | Drain valve against wall, can't access |
| Wired to appropriate circuit safely | Plugged into extension lead with other tools |
What You Get
🔧 The Full Service
| Stage | What Happens |
|---|---|
| Assessment | Check your space, floor, electrical supply |
| Positioning | Place compressor in optimal location |
| Connection | Wire safely (or advise on electrical work needed) |
| Testing | Run through full cycle, check for issues |
| Training | Show you operation, maintenance, safety |
📦 You're Left With
- Compressor positioned and working
- Clear instructions on maintenance intervals
- Confidence to use it safely
Pricing Guide
| Setup Type | Estimated Time | You'll Pay |
|---|---|---|
| Small DIY compressor | 45 mins | £60-£85 |
| Larger workshop unit | 1 hr | £60 |
| Wall mounting included | 1.5 hrs | £85 |
Based on £60 minimum (first hour) + £50/hr after. Doesn't include electrical circuit installation if needed.
Perfect For...
✅ New workshop setup - getting your garage properly organized
✅ Upgrade - replacing old compressor with larger unit
✅ Just bought one - still in the box, need help getting started
✅ Moving house - need compressor repositioned in new garage
Why Choose Us for Compressor setup in Exeter?
Positioned for best access and drainage
Wired safely to appropriate circuit
Tested and ready to use
Advice on maintenance and operation
What to Expect
Step 1: Site Assessment
I check your garage floor (solid or hollow?), ventilation, electrical supply, and space. Then we discuss where the compressor will work best for your workflow and access.
Step 2: Positioning & Setup
Compressor positioned, vibration dampening added if needed, wired in safely. If you need a dedicated circuit that's beyond plug-and-play, I'll advise exactly what an electrician needs to install.
Step 3: Testing & Training
Run the compressor through a full cycle, check pressure switch operation, explain the drain valve maintenance, show you any specific features, and answer your questions.
🔧 DIY Tips
Want to set up your own compressor? Here's how to do it safely:
🔧 Tools you'll need
- Spirit level
- Rubber anti-vibration pads or mat
- Appropriate electrical connection (verify amperage first)
- Spanners for any assembly
📍 Choosing location
- Solid floor (concrete ideal, not hollow timber)
- At least 30cm clearance all around for ventilation
- Away from flammable materials
- Drain valve accessible (you'll use it monthly)
- Near appropriate electrical outlet
🔌 Electrical requirements
- Check compressor amp rating on specification plate
- Small DIY units (under 2HP): standard 13amp plug usually fine
- Larger units (over 2HP): often need dedicated 16-32amp circuit
- Never daisy-chain extension leads for compressor use
⚠️ Common DIY mistakes
- Positioning on hollow floor (vibration travels through house)
- No ventilation clearance (motor overheats)
- Using inadequate electrical supply (trips breaker, damages motor)
- Never draining moisture from tank (rust, eventual failure)
💡 Pro trick: Put the compressor on a rubber mat (old horse stall mat works perfectly) to reduce vibration noise. Make a huge difference in a garage attached to the house.
Rather leave it to a pro? No problem - that's what I'm here for. Give me a call.
Good to Know
🔧 Planning a full workshop? If you're setting up multiple tools and equipment, let me know. I can help plan the layout for best workflow and electrical requirements all at once.
Need electrical work? If your compressor needs a dedicated circuit I can't install myself, I'll tell you exactly what size circuit you need and where it should go. Then you can get an electrician to install it before we proceed.
Noise concerns? Attached garage with bedroom above? I'll position and dampen the compressor to minimize noise transmission. Can't make it silent, but can stop it vibrating your whole house.
Frequently Asked Questions
What's involved in compressor setup?
I position the compressor in the best spot for access and drainage, check you've got the right electrical supply, wire it in safely (or advise if you need an electrician for a new circuit), test it works properly, and show you basic operation and maintenance.
Does it need special electrics?
Depends on the compressor size. Small DIY compressors run off a standard 13amp socket. Larger workshop compressors need dedicated circuits - I'll check yours and advise if you need an electrician for a new circuit first.
Where should a compressor go in my garage?
Ideally on a solid floor near a wall (reduces vibration noise), with good ventilation, away from anything flammable, and where the drain valve is accessible. I'll assess your garage and recommend the best spot.
How long does setup take?
About 45 minutes to an hour. That includes positioning, any vibration dampening, electrical connection, testing, and showing you the basics. Longer if we need to install wall brackets or build a small platform.
Will it be very loud?
All compressors make noise when running, but positioning makes a difference. I can advise on vibration dampening and positioning to minimize noise transmission through your house if that's a concern.
Compressor setup Also Available In:
Get a Free Quote in Exeter
Call us today for a free, no-obligation quote for your compressor setup job in Exeter.
01392 964094Request Online QuoteOur Rates
Got multiple jobs?
Make the most of your first hour - I can often tackle several small tasks in one visit. List everything you need done when you call!
Why Trust Us
Need Compressor setup in Exeter?
Get a free quote for your compressor setup job in Exeter today.