Draught excluder fitting in Exeter
Professional draught excluder fitting services in Exeter and surrounding areas. Local, reliable handyman - no job too small.
Price Guide
£60-£110
Typical Duration
1-2 hrs
Location
Exeter, Devon
Draught excluders fitted properly to doors and windows - brush strips, compression seals, letterbox covers all installed. Stop feeling that cold air and wasting money heating the outdoors.
Stop Heating The Street
Feel that cold draught shooting across the room every time the wind picks up? That's your expensive heating escaping and cold air rushing in.
Doors, windows, letterboxes, keyholes - all letting air through. Seal them properly and your house stays warmer, quieter, and cheaper to heat.
💡 Pro tip: Older Exeter properties are notoriously draughty. Victorian and Edwardian houses were built before central heating existed - they rely on fireplaces and air circulation. Modern draught-proofing makes them way more comfortable without losing the character.
Where Draughts Come From
| ✅ Easy Fixes | ❌ Bigger Jobs |
|---|---|
| Under external doors | Between floorboards (needs lifting) |
| Around door frames | Through chimney (needs work) |
| Window gaps and rattles | Wall cavities (structural issue) |
| Letterboxes and keyholes | Loft hatch (different job) |
What I Fit
🚪 Door Draught Proofing
| Product | Where | Effect |
|---|---|---|
| Brush strip | Bottom of door | Stops floor-level draught |
| Compression seal | Door frame rebate | Seals when door closes |
| Threshold strip | Floor at door base | Stops underfloor draught |
| Letterbox seal | Inside letterbox | Stops flap rattling, blocks draught |
| Keyhole cover | Front/back door locks | Stops whistling draught through keyhole |
🪟 Window Draught Proofing
| Product | Where | Effect |
|---|---|---|
| Self-adhesive seal | Opening windows | Stops rattling and gaps |
| Brush seal system | Sash windows | Proper seal without stopping operation |
| Secondary glazing seal | Secondary glazing frames | Improves seal and insulation |
Pricing Guide
| Job | Time | You'll Pay |
|---|---|---|
| Single external door (full treatment) | 1 hr | £60 |
| Front + back door | 1.5-2 hrs | £85-£110 |
| Window draught-proofing (per window) | 30-45 mins | £60 |
| Full house (2 doors, 6 windows) | 3-4 hrs | £160-£210 |
Based on £60 minimum (first hour) + £50/hr after. Includes standard materials.
Perfect For Your Project If...
✅ Hallway's freezing - front door letting cold air pour in
✅ Heating bills ridiculous - wasting money warming the outdoors
✅ Windows rattle - gaps everywhere when it's windy
✅ Old house character - keep original features but add comfort
Why Choose Us for Draught excluder fitting in Exeter?
Stops cold draughts immediately
Reduces heating bills
Keeps rooms warmer
Reduces noise from outside
What to Expect
Step 1: Survey
I'll check all your external doors and windows, identify where draughts are coming from, and recommend the best solutions for each location.
Step 2: Fit Products
Draught excluders fitted properly - brush strips screwed to door bottoms, compression seals fitted in frame rebates, window seals applied neatly. Everything tested to make sure doors/windows still operate smoothly.
Step 3: Test & Adjust
Check operation, make sure seals are working, adjust anything that needs tweaking. You'll feel the difference straight away when you close the door.
🔧 DIY Tips
Draught-proofing is very doable DIY if you're methodical:
🔧 Tools you'll need
- Tape measure
- Scissors or Stanley knife
- Screwdriver (for brush strips)
- Clean cloth and methylated spirits (for self-adhesive)
📐 Fitting a door brush strip
- Measure door width
- Cut brush strip to length
- Position at bottom of door (just touching floor when closed)
- Mark screw holes
- Drill pilot holes (prevents splitting)
- Screw in place
- Test door closes without catching
🪟 Applying window seals
- Clean frame edge thoroughly with meths
- Measure and cut seal to length
- Peel backing and apply smoothly
- Press firmly along entire length
- Test window closes properly
⚠️ Common DIY mistakes
- Brush strip too low (catches on carpet/floor)
- Not cleaning surface before adhesive seals (peels off in weeks)
- Using cheap foam strips (compress and fail quickly)
- Sealing windows too tight (can't open them)
💡 Pro trick: Fit draught excluders in autumn when it's dry. Adhesive seals don't stick well in cold/damp conditions. And you'll have them sorted before winter properly arrives.
Rather leave it to a pro? No problem - that's what I'm here for. Give me a call.
Good to Know
💰 Energy savings: A properly draught-proofed house can save 10-15% on heating bills. The materials cost £50-150 for an average house. Pays for itself in 1-2 winters.
Whole house approach? Makes sense to do all external doors and ground floor windows together. Maximum impact, better value, one visit.
Old vs new properties: Newer houses (post-1990s) usually have decent draught-proofing already. It's the older Exeter properties - Victorian, Edwardian, 1930s - that benefit most.
Don't seal everything! Houses need some ventilation. I draught-proof doors and windows but won't seal vents, airbricks, or necessary ventilation. A bit of controlled airflow is healthy.
Frequently Asked Questions
Do draught excluders actually make a difference?
Absolutely. A draughty door or window can lose as much heat as leaving a small window open. Seal it properly and you'll feel the difference immediately - and see it in your heating bills.
What types of draught excluder do you fit?
Depends on the gap and location. Brush strips for door bottoms, compression seals for door frames, self-adhesive foam for windows, keyhole covers, letterbox seals. I'll use whatever works best for your specific situation.
Can you draught-proof old sash windows?
Yes - there are specialist brush seal systems designed for sash windows that don't stop them operating. Much more effective than those stick-on foam strips that peel off after a month.
Will draught excluders damage my doors or windows?
No - modern products are designed to be fitted without damage. Brush strips screw in, compression seals fit in the rebate, self-adhesive ones peel off cleanly if needed. All reversible.
How long do draught excluders last?
Good quality ones fitted properly last 5-10 years easily. Cheap stick-on foam strips last about one winter. You get what you pay for - I use stuff that actually lasts.
Draught excluder fitting Also Available In:
Get a Free Quote in Exeter
Call us today for a free, no-obligation quote for your draught excluder fitting job in Exeter.
01392 964094Request Online QuoteOur Rates
Got multiple jobs?
Make the most of your first hour - I can often tackle several small tasks in one visit. List everything you need done when you call!
Why Trust Us
Related Services
Door draught proofing
Windows & Draught Proofing
£60-£110
Double glazing repair
Windows & Draught Proofing
£60-£160
Keyhole draught excluder
Windows & Draught Proofing
£60
Letterbox draught excluder
Windows & Draught Proofing
£60
Misted double glazing repair
Windows & Draught Proofing
Quote - depends on size
Secondary glazing fitting
Windows & Draught Proofing
£85-£210
Need Draught excluder fitting in Exeter?
Get a free quote for your draught excluder fitting job in Exeter today.