Garden Gate Installation in Exeter

Professional garden gate installation services in Exeter and surrounding areas. Local, reliable handyman - no job too small.

Price Guide

£135-210

Typical Duration

2.5-4 hrs

Location

Exeter, Devon

Garden gate installation from scratch - posts set, gate hung, job done properly. Whether you're adding a gate to existing fencing or creating a new entrance, we'll install it right.

Add a Gate Where You Need One

Need a new gate installed in your garden fence? We'll set solid posts, hang your chosen gate perfectly level, and fit proper hardware so it opens smoothly and latches securely. From simple pedestrian gates to double gates for vehicle access, we do it properly.

💡 Pro tip: Gate installation is a 2-3 day job because posts need to set in concrete for 24-48 hours before the gate can be hung. Anyone promising same-day installation is cutting corners.


Done Right vs Done Wrong

✅ Done Right❌ Done Wrong
Posts set deep (600mm+) in concreteShallow posts that wobble
Gate sized with proper clearanceGate tight in opening, binding
Heavy-duty hinges with long screwsCheap hinges, gate sagging quickly
Latch positioned at natural heightLatch awkward to reach or use

What You Get

🔧 The Full Service

StageWhat Happens
Site PrepMark gate position, check for services, cut existing fence if needed
Set PostsDig holes 600mm+ deep, set posts plumb in concrete, leave to cure
Hang Gate(24-48hrs later) Fit heavy-duty hinges, hang gate level and square
FinishingFit latch and stops, test operation, clear up all waste

📦 You're Left With

  • New gate opening and closing smoothly
  • Solid posts set properly in concrete
  • Professional finish that looks right
  • Site cleared with waste removed

Pricing Guide

ScopeEstimated TimeYou'll Pay
Simple pedestrian gate2.5 hrs (across 2 days)£135
Standard gate with extras3 hrs (across 2 days)£160
Large gate or complex install4 hrs (across 2 days)£210

£60 minimum (first hour) + £50/hr after. Gate and posts cost separate. Concrete included.


Perfect For Your Project If...

Adding Access - You need a new gate through existing fencing for easier garden access

New Fencing - You're having fencing installed and want a gate included in the run

Wider Opening - You need double gates for vehicle or equipment access

Replacing & Upgrading - Old gate and posts are both shot, so you're starting fresh

Why Choose Us for Garden Gate Installation in Exeter?

Gate hung perfectly level

Solid posts properly set

Smooth operation from day one

Choice of styles and materials

What to Expect

Step 1: Site Visit

We measure your opening, discuss gate style and size, check for underground services, and advise on the best approach. You'll get a clear quote covering everything.

Step 2: Day One - Posts

We arrive with posts, concrete, and equipment. Cut existing fence if needed, dig post holes, and set posts perfectly plumb in concrete. This needs to cure before we continue.

Step 3: Day Two - Gate Hanging

Once posts are solid (24-48hrs later), we return to hang the gate. Hinges fitted, gate hung level, latch installed and adjusted.

Step 4: Final Check

We test the gate thoroughly - opening, closing, latching. You try it too. We adjust anything that's not perfect, then clean up completely.

🔧 DIY Tips

Installing a gate properly requires specific skills - here's what's involved:

🔧 What you'll need

  • Post hole digger or auger
  • Spirit level (6ft is ideal)
  • Concrete and mixing equipment
  • String line for alignment

📐 How to do it

  1. Mark your gate opening with stakes and string line
  2. Check carefully for underground services before digging
  3. Dig post holes 600mm deep (deeper in soft ground)
  4. Set first post plumb, use string line to align second post
  5. Check posts are plumb in both directions before concrete sets
  6. Let concrete cure minimum 48 hours (72 in wet weather)
  7. Hang gate using method described in gate replacement tips
  8. Fit catch and stops, test thoroughly

⚠️ Common mistakes

  • Not leaving posts long enough to cure (gate weight pulls posts out of plumb)
  • Posts not deep enough for gate height and weight
  • Not checking both posts are parallel before concrete sets
  • Buying a gate that doesn't fit the opening you've created

💡 Pro trick: Set your gate posts so the opening is 10-15mm wider than your gate. This gives you clearance for smooth operation and room to adjust if the gate swells in wet weather. Too tight is worse than too loose.

Rather leave it to a pro? No problem - that's what I'm here for. Give me a call.

Good to Know

🔧 This takes 2-3 days: Day 1 we set the posts, then 24-48hrs for concrete to cure, then Day 2 we hang the gate. This is standard practice for proper installation.

Combine with:

  • Fence panel installation either side
  • Post and rail fencing for runs
  • Gravel boards for fence protection

Related services:

  • Garden gate replacement
  • Gate post replacement
  • Fence panel repair

Frequently Asked Questions

Can you install a gate where there isn't one currently?

Yes, that's exactly what we do. We'll cut into your existing fence line (or work with an existing gap), set new posts in concrete, and hang a gate that fits properly. It usually takes 2-3 days because posts need 24-48 hours to set before we can hang the gate.

What size gate can you install?

Most garden gates are 0.9-1.2m wide - that's standard and straightforward. We can do wider gates (up to 1.8m single gate or double gates for vehicle access), but they need beefier posts and hinges. Tell us your opening width and what's going through it, and we'll spec it properly.

Do I need to do anything before you arrive?

Clear access to where the gate's going is helpful - we'll need to dig post holes and get materials in. If there's existing fence to cut, let us know in advance. We'll handle everything else including checking for underground services before we dig.

What's the difference in cost between timber and metal gates?

Metal gates cost more upfront (roughly 50-100% more than timber) but last longer with less maintenance. Timber gates suit traditional properties and cost less, but need treating every few years. We'll show you options for both and let you decide what makes sense for your budget and property.

Get a Free Quote in Exeter

Call us today for a free, no-obligation quote for your garden gate installation job in Exeter.

01392 964094Request Online Quote

Our Rates

Minimum charge£60
Includes callout + first hour
Additional time£50/hr
This Job£135-210

Got multiple jobs?

Make the most of your first hour - I can often tackle several small tasks in one visit. List everything you need done when you call!

Why Trust Us

Fully Insured
Local Exeter Business
30 Mile Coverage
No Hidden Costs

Need Garden Gate Installation in Exeter?

Get a free quote for your garden gate installation job in Exeter today.