Gate Hinge Replacement in Exeter
Professional gate hinge replacement services in Exeter and surrounding areas. Local, reliable handyman - no job too small.
Price Guide
£60-£85
Typical Duration
0.5-1 hrs
Location
Exeter, Devon
Worn or rusted gate hinges replaced with new hardware. Gate swings properly, closes smoothly, no more scraping.
Gates That Actually Work
A gate's meant to swing smoothly and close without drama. When hinges wear out - and they all do eventually - you get sagging, scraping, and that annoying creak every time someone uses it. Twenty minutes with the right hinges sorts it.
💡 Pro tip: If your gate's sagging, check the hinges first before assuming you need a whole new gate. Nine times out of ten, fresh hinges fix it for a fraction of the cost.
Done Right vs Done Wrong
| ✅ Done Right | ❌ Done Wrong |
|---|---|
| Gate swings smoothly at all points | Binds halfway through the swing |
| Closes quietly without forcing | Scrapes on the ground or frame |
| Hinges aligned and load-bearing | Mismatched or undersized hinges |
| Hardware appropriate for gate weight | Cheap hinges that'll fail in months |
What You Get
🔧 The Full Service
| Stage | What Happens |
|---|---|
| Assessment | Check hinge condition, gate alignment, and post stability |
| Removal | Take off old hinges (and gate if necessary) |
| Fitting | Install new hinges with proper fixings for the material |
| Testing | Multiple open/close cycles to verify smooth operation |
📦 You're Left With
- Gate that swings freely without catching
- Proper alignment so it closes square
- Hardware that'll handle Devon weather
- Old hinges removed and binned
Pricing Guide
| Scope | Estimated Time | You'll Pay |
|---|---|---|
| Simple hinge swap | 30 mins | £60 |
| Standard job | 1 hr | £60 |
| Awkward access/heavy gate | 1.5 hrs | £85 |
£60 minimum (first hour) + £50/hr after. Price includes labour; hinges charged at cost.
Perfect For Your Project If...
✅ Gate's sagging - Bottom corner drags on the ground or path
✅ Rusty hinges - Years of weather have corroded the hardware
✅ Noisy gate - Squeaks or creaks every time it moves
✅ Misaligned closure - Gate doesn't sit square in the frame anymore
Why Choose Us for Gate Hinge Replacement in Exeter?
Gate swings smoothly again
No more scraping or dragging
Properly aligned closure
Quick 30-60 minute job
What to Expect
Step 1: Quick Check
I'll assess the gate, hinges, and posts to confirm what's needed and whether there are any other issues to address.
Step 2: Hinge Replacement
Remove old hardware and fit new hinges with appropriate fixings. If the gate needs to come off, it does - but only if necessary.
Step 3: Testing
Multiple swings to make sure everything's smooth, aligned, and closing properly before I pack up.
🔧 DIY Tips
If you fancy doing it yourself, here's the realistic version:
🔧 What you'll need
- Replacement hinges (match size and weight rating)
- Drill/driver with appropriate bits
- Spirit level
- Someone to hold the gate (they're heavier than they look)
📐 How to do it
- Support the gate properly before removing old hinges
- Mark new hinge positions if they're different
- Pre-drill holes to avoid splitting timber
- Fit bottom hinge first, then top
- Test operation before fully tightening everything
⚠️ Common mistakes
- Using hinges too small for the gate weight
- Not supporting the gate properly (dangerous)
- Overtightening screws in old timber
- Forgetting to check posts are still plumb
💡 Pro trick: Rub a bit of candle wax on the hinge pin - quieter than oil and doesn't attract dirt.
Rather leave it to a pro? No problem - that's what I'm here for. Give me a call.
Good to Know
🔧 Timing matters: If your gate posts are also wonky, sort those first. New hinges on dodgy posts won't help.
Combine with:
- Gate latch fitting (while I'm there)
- Gate spring fitting (if you want self-closing)
- Fence post repair (if posts need attention)
Related services:
- Side gate installation
- Gate spring fitting
- Gate latch fitting
Frequently Asked Questions
Can you just replace the hinges without taking the gate off?
Depends on the hinge type. Most modern hinges can be swapped while the gate's in place, which is quicker. Older pinned hinges usually mean lifting the gate off. I'll assess when I arrive and use whatever method gets the job done fastest.
Will new hinges fix my sagging gate?
If the sag is just from worn hinges, absolutely. But if the gate frame itself is twisted or the posts are out of plumb, we'll need to address those too. I'll be honest about what's needed when I see it.
Do you bring the hinges or do I need to buy them?
I carry common sizes and styles in the van. For specialty hinges or if you want a specific finish, I can grab them from a local supplier - just adds a bit of time. Photos help me bring the right ones first time.
How long before I can use the gate again?
Immediately. Hinge replacement is mechanical, nothing needs to cure or set. Once they're on and tested, you're good to go. I'll give it a few swings to make sure everything's smooth before I leave.
Gate Hinge Replacement Also Available In:
Get a Free Quote in Exeter
Call us today for a free, no-obligation quote for your gate hinge replacement job in Exeter.
01392 964094Request Online QuoteOur Rates
Got multiple jobs?
Make the most of your first hour - I can often tackle several small tasks in one visit. List everything you need done when you call!
Why Trust Us
Need Gate Hinge Replacement in Exeter?
Get a free quote for your gate hinge replacement job in Exeter today.