Door Trim Fitting in Exeter
Professional door trim fitting services in Exeter and surrounding areas. Local, reliable handyman - no job too small.
Price Guide
£60-85
Typical Duration
1-1.5 hrs
Location
Exeter, Devon
Door trim fitting for laminate, LVT, and other hard flooring. Professional cuts, neat finish.
The Finishing Touch Your New Floor Needs
New flooring looks brilliant until you get to the doorways and see ragged edges and expansion gaps staring back at you. Door trims sort that out - they bridge the gap between floor and doorframe, protect the edges, and make the whole job look finished.
💡 Pro tip: Order door trims when you buy your flooring. Most manufacturers include matching profiles, and you'll kick yourself if you have to hunt for the right colour later.
Done Right vs Done Wrong
| ✅ Done Right | ❌ Done Wrong |
|---|---|
| Tight mitre cuts at corners, no gaps | Sloppy cuts with visible gaps |
| Trim sits flush with floor surface | Trim stands proud or leaves a lip |
| Fixed securely, no movement | Loose trim that shifts underfoot |
| Colour matches the flooring | Generic trim that doesn't match |
What You Get
🔧 The Full Service
| Stage | What Happens |
|---|---|
| 1. Measure & Check | I measure each doorway, check door clearance, and confirm what trim profile you need |
| 2. Cut & Fit | Precise cuts to length, mitres for corners, and careful fitting to avoid damaging your new floor |
| 3. Fix in Place | Glued, pinned, or track-fixed depending on trim type - whatever gives the best result |
| 4. Tidy Up | Wipe down, check everything sits flush, and clear away any offcuts |
📦 You're Left With
- Door trims fitted to all doorways
- Clean transition from room to room
- Protected floor edges that won't chip
- Professional finish that matches your flooring
Pricing Guide
| Scope | Estimated Time | You'll Pay |
|---|---|---|
| Single doorway | 1 hr | £60 |
| 2-3 doorways | 1.5 hrs | £85 |
| Full house (4-6 doorways) | 2 hrs | £110 |
£60 minimum (first hour) + £50/hr after.
Perfect For Your Project If...
✅ You've just had new flooring fitted - And it's not quite finished because the door gaps look rough
✅ Your old trims are damaged - Scuffed, cracked, or the wrong colour for your new floor
✅ You're doing a room-by-room renovation - And need proper transitions between different floor levels
✅ You're DIYing your floor but want help with the fiddly bits - The trim work needs precision cuts and it's easy to bugger up
Why Choose Us for Door Trim Fitting in Exeter?
Precise mitre cuts for tight corners
Matched to your flooring type
Tidy gap coverage around doors
Clean, professional finish
What to Expect
Step 1: Quick Check
I'll check what type of trims you need (T-section, ramp, or Scotia), measure up, and confirm you've got the right profiles.
Step 2: Fitting
Careful cutting to length, mitring corners where needed, and fixing in place. I'll work around the door if it's tight, or let you know if it needs trimming.
Step 3: Finish
Once they're down, I'll check they're flush and secure, wipe everything clean, and you're done.
🔧 DIY Tips
Fitting door trims yourself? Here's how to avoid the common cock-ups:
🔧 What you'll need
- Fine-tooth saw or mitre saw
- Tape measure and pencil
- Pin gun or adhesive (depending on trim type)
- Door trim profiles
📐 How to do it
- Measure the doorway width carefully - measure twice, cut once
- Cut the trim slightly long, then test fit before fixing
- For T-section trims, glue the track down first and let it set
- Tap the trim into place gently - don't force it or you'll snap it
- Pin or glue Scotia and ramp trims, cleaning off excess adhesive immediately
⚠️ Common mistakes
- Cutting trims too short - there's no fixing that
- Not checking door clearance before fitting
- Using the wrong adhesive that doesn't grip properly
- Forcing trim pieces that don't quite fit
💡 Pro trick: If you're fitting multiple doorways, cut all your trims at once and label them. You'll work faster and won't mix up which piece goes where.
Rather leave it to a pro? No problem - that's what I'm here for. Give me a call.
Good to Know
🔧 Timing matters: If you're having new flooring fitted, door trims usually go on at the end once the floor has settled. Don't rush it.
Combine with:
- Laminate flooring installation
- LVT flooring installation
- Door trimming (if clearance is tight)
Related services:
- Scotia fitting
- Skirting board installation
- Floor repairs
Frequently Asked Questions
Do I need door trims with new flooring?
Yeah, you do. Door trims cover the expansion gap between your new floor and the doorframe. Without them, you've got an ugly gap showing, and the floor edge can get damaged. They finish the job properly.
Can you match the trim to my flooring colour?
Usually, yes. Most laminate and LVT brands include matching door trims. If you're using your own flooring, check what trims are available. I can also fit generic trims in oak, walnut, or white if needed.
Will you need to trim the door?
Sometimes. If your new floor is thicker than the old one, the door might catch. I'll check clearance and can trim doors if needed - that's a separate job though, so I'll let you know beforehand.
How do you fix them down?
Depends on the trim type. T-section trims slot into a track that's glued down. Ramp trims and Scotia beading get pinned or glued. I'll use whichever method suits your flooring and subfloor best.
Door Trim Fitting Also Available In:
Get a Free Quote in Exeter
Call us today for a free, no-obligation quote for your door trim fitting job in Exeter.
01392 964094Request Online QuoteOur Rates
Got multiple jobs?
Make the most of your first hour - I can often tackle several small tasks in one visit. List everything you need done when you call!
Why Trust Us
Need Door Trim Fitting in Exeter?
Get a free quote for your door trim fitting job in Exeter today.