Vinyl Flooring Installation in Exeter

Professional vinyl flooring installation services in Exeter and surrounding areas. Local, reliable handyman - no job too small.

Price Guide

£210-£350+

Typical Duration

4-6+ hrs

Location

Exeter, Devon

Vinyl flooring installed properly from start to finish. Subfloor prep, precise cutting, neat finishing around edges and doorways - a floor that looks great and lasts.

Vinyl flooring is brilliant for kitchens, bathrooms, hallways, and anywhere you need a waterproof, hard-wearing floor that's easy to clean. But fitting it properly takes more than rolling it out and slapping it down. Subfloor needs prepping, vinyl needs cutting precisely, and edges need finishing neatly.

Types of Vinyl We Fit

Sheet Vinyl - Comes in rolls, glued down, minimal seams. Best for bathrooms and wet areas. Takes skill to cut around toilets, pipes, and awkward corners.

Vinyl Planks (LVT) - Click-lock planks that look like wood. Easy to fit, replace if damaged, and feels more solid underfoot than sheet vinyl.

Vinyl Tiles - Same as planks but in tile shapes. Some click together, some stick down with adhesive. Good for smaller rooms or patterned designs.

Subfloor Preparation

A good vinyl installation starts with a good subfloor. We'll:

  • Remove old flooring if needed
  • Fill dips and level bumps with floor compound
  • Clean and vacuum thoroughly (dust stops adhesive sticking)
  • Check for dampness (vinyl can trap moisture and cause problems)

Done Right vs Done Wrong

Done RightDone Wrong
Subfloor flat and level, no bumpsEvery lump shows through, vinyl wears faster
Seams glued or clicked tight, invisibleGaps between planks, water gets underneath
Edges cut neat around doorways and pipesSloppy cuts, gaps filled with silicone
Pattern aligned across the roomPattern shifts halfway, looks rubbish

What You Get

What's Included
Subfloor assessment and prep (levelling if needed)
Removal of old flooring (if required)
Vinyl cutting, fitting, and gluing/clicking
Edge trimming around skirting and doorways
Threshold strip installation at doorways
Clean-up and disposal of waste materials

Pricing Guide

Time RequiredTotal Cost
4 hours£210
5 hours£260
6 hours£310
Full day+Quote based on job

Pricing depends on room size, type of vinyl (sheet vs planks), subfloor condition, and complexity (lots of cuts around fittings). We'll give you a fixed price quote after seeing the job.

Pro Tip: Let vinyl acclimatise in the room for 24-48 hours before fitting. Stops it expanding or contracting after installation.

Why Choose Us for Vinyl Flooring Installation in Exeter?

Subfloor levelled and prepped for flat finish

Sheet vinyl welded or glued with invisible seams

Click-lock planks fitted tight with no gaps

Edges trimmed neat around doorways and fittings

What to Expect

1. Quote and Planning - We'll visit, measure up, check the subfloor, and discuss which type of vinyl you're using. If you haven't bought it yet, we can advise on quantities and where to get it.

2. Prep and Installation - We'll prep the subfloor (levelling if needed), then fit the vinyl. Sheet vinyl gets glued down carefully with seams planned to be least visible. Planks get clicked together tight with no gaps.

3. Finishing Touches - Edges trimmed neatly, threshold strips fitted at doorways, everything cleaned up. You'll get advice on when you can move furniture back in.

🔧 DIY Tips

Tools You'll Need:

  • Utility knife with fresh blades
  • Straight edge or metal ruler
  • Vinyl adhesive and trowel (for glued vinyl)
  • Tape measure and pencil
  • Vinyl roller (for pressing glued vinyl down)

How to DIY (Click-Lock Vinyl Planks):

  1. Prep the floor - Clean and level your subfloor. Vacuum thoroughly. Lay a thin foam underlay if recommended by the manufacturer.
  2. Plan your layout - Start from the longest, straightest wall. Measure to ensure you don't end up with a tiny sliver of plank at the far end.
  3. Click planks together - Start in a corner, click the short ends together first, then angle and click the long edges. Stagger joins like brickwork.
  4. Cut to fit - Measure and cut planks to fit at the end of rows and around doorways. Use a sharp knife and metal straight edge.
  5. Fit threshold strips - Cover the expansion gap at doorways with a threshold strip.

Common DIY Mistakes:

  • Not leaving expansion gaps around edges (vinyl expands, floor buckles)
  • Aligning plank seams (should be staggered like bricks)
  • Cutting planks upside down (splinters the decorative surface)

Pro Trick: When fitting around door frames, undercut the frame slightly with a saw so vinyl slides underneath. Looks way neater than trying to scribe around it.

Rather leave it to a pro? No problem - that's what I'm here for. Give me a call.

Good to Know

Combine With: If we're fitting vinyl, it's a good time to fit skirting boards (if removed), threshold strips, or even sort any plumbing that's easier to access with the floor up.

Related Services: Vinyl flooring repair, threshold strip fitting, underlay fitting (if required).

Perfect For Your Project If...

✅ You're renovating a kitchen, bathroom, or hallway ✅ You want waterproof flooring that's easy to clean ✅ You've bought vinyl and need it fitted properly ✅ Your subfloor needs levelling before you can lay the floor

Frequently Asked Questions

What's the difference between sheet vinyl, planks, and tiles?

Sheet vinyl comes in rolls and is glued down - best for bathrooms and kitchens where you want minimal seams. Vinyl planks and tiles (LVT) click together like laminate - easier to fit and replace individual pieces if damaged. We can advise which suits your room.

Does the subfloor need to be perfect?

It needs to be clean, dry, and reasonably level. Small bumps and dips can be filled with floor levelling compound. Really uneven floors will need more prep, which we'll discuss when we quote.

Can vinyl go over existing flooring?

Sometimes. If your old floor is flat, solid, and well-stuck down, vinyl can go straight over it. Loose tiles, lumpy lino, or carpet will need removing first. We'll check and advise.

How long before I can use the room?

Click-lock vinyl can be walked on immediately. Glued-down vinyl needs 24 hours before heavy use or furniture. We'll give you specific timings based on what we're fitting.

Get a Free Quote in Exeter

Call us today for a free, no-obligation quote for your vinyl flooring installation job in Exeter.

01392 964094Request Online Quote

Our Rates

Minimum charge£60
Includes callout + first hour
Additional time£50/hr
This Job£210-£350+

Got multiple jobs?

Make the most of your first hour - I can often tackle several small tasks in one visit. List everything you need done when you call!

Why Trust Us

Fully Insured
Local Exeter Business
30 Mile Coverage
No Hidden Costs

Need Vinyl Flooring Installation in Exeter?

Get a free quote for your vinyl flooring installation job in Exeter today.